Soda / Sand Blaster Sydney Wanted

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 9 Oct 2014, 2:13 pm

#1001532

Anyone have any leads for sand blasting in the greater Sydney region. Pair of doors for a kombi so somewhere where they come back straight not warped.

somewhere they can be dipped or paint stripped alternatively

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 9 Oct 2014, 2:32 pm

#1001533

Hi

Make sure they give you instructions on how to prepare for paint after blasting, my car had to be repainted after soda blasting due poor adhesion, the painter had never painted a soda blasted car before and the blaster didn't give any prep instructions

Steve

robb Officially Full-On Dubber

279 posts · joined Apr 2010 · 9 Oct 2014, 7:34 pm

#1001545

hey beerboy for what its worth I have used redistrip out there at blacktown every thing worked out good came out clean as a whistle

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 · 9 Oct 2014, 8:28 pm

#1001549

After Soda blasting, you must clean the panels with boiling water. Then De-oxidine the panels. Then epoxy prime the metal within 8 hours.

EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 10 Oct 2014, 8:42 am

#1001577

robb wrote:hey beerboy for what its worth I have used redistrip out there at blacktown every thing worked out good came out clean as a whistle

great thanks. website looks good too. thanks for all the input

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71