Skip to content
Aussieveedubbers

Put new shockers on the bus

0 likes
Share Share on Facebook Share on X Share on Reddit

Sunnyjim Officially Full-On Dubber

239 posts · joined Jan 2010 ·

#1006477
Pete

I am glad to hear of someone who has a good outcome.
Is your bus lowered at all?
My 76 bay is lowered mildly at 3 inches I feel every bump.

I don't know what type and how old my shocks are but guess I should check this before doing dropped spindles?

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 ·

#1006478
I lowered our bus about 100mm with Angus style adjusters on the front and notched rear spring plates. The ride was not very good

Then I put the Suby in, got it engineered, and raised it so it is only 60mm lowered from stock. The ride was much better and more useable. We use the bus for towing and it does see some dirt roads so it is a good height now.

Now with new shocks, it is great.
EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

Sunnyjim Officially Full-On Dubber

239 posts · joined Jan 2010 ·

#1006518
pete

i will look into those , thanks

waltermitty Legend when my beer goggles are on

1,993 posts · joined Aug 2002 ·

#1006526
Peter were the others flogged out or did you just change them to better quality? I ask as I have new but very chap ones in my bus and suspect they could be better.
Mitchell
23 windows ...8 too many!

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 ·

#1006557
About 16 years ago put a set of Monroe Gas shockers on the bus. We were doing a bit of dirt road driving. They lasted 14 months and 1 front and 1 rear had totally collapsed. The warranty was 12 months.

Then I put a set of Gabriel shocks. They have been on for 15 years, and for the reasonable price, they have lasted a fair amount of time. They are just worn out.

The Pedders Sports Ryders are heavier duty, and now we are back to going on some dirt roads and towing a trailer with dirt bikes, they have fitted the job well, in the dirt, and on the highway.

I know KYB's and Konis are great shocks too, and I run Koni's in most other vehicles I work with. I just was able to get the Paedders at a good price.
EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info