Skip to content
Aussieveedubbers

Vac or no vac?

0 likes
Share Share on Facebook Share on X Share on Reddit

roofchop Seriously Crusin Dubber

177 posts · joined Jan 2011 ·

#1010783
Just got my dual ICT's Hooray!

I already decided to bin the 009 and go vac advance (Pertronix flame thrower1 inc coil)

However the supplied instructions for the Empi ICT's say they work best with 009!!!

1641, single port, stock cam, heads etc in a beetle.

What do you all think?

Cheers
Dave

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#1010805
Always vac IMO. However, try and get a vac reading from the std kit as you can have either too little vac from a single carb or too much from a twin carb t'd together.

Many people do run the 009 but it's quite hard to remove the flat spot just off idle and the vac don't suffer from that 🙂
madness is in the eye of the beholder 👍

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#1010840
009 flat spot is with a 34 PICT as they are set up lean. Dual carbs work fine with a good 009
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#1010876
matberry wrote:009 flat spot is with a 34 PICT as they are set up lean. Dual carbs work fine with a good 009
Kads and ICts are prone to the flat spot too if the jetting ain't right. MAinly down to the emulsion tube but at the end of the day you're just chucking more fuel at the flat spot to stop the engine from bogging.

Vac advance allows the engine to pull properly from the idle to main carb circuit. I've always found a vac advanced engine to drive better, more smoothly, than a non vac. This is just my finding from owning such small capacity engines and working on them in the past.
madness is in the eye of the beholder 👍

HappyDaze Superannuated

2,887 posts · joined Jun 2009 ·

#1010878
When I was a lad, I was very keen on Kim NOVAK. 😵
I'd rather wear a Beetle out by racing it than by polishing it!

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 ·

#1010879
HappyDaze wrote:When I was a lad, I was very keen on Kim NOVAK. 😵
MMMMMMMM! 😉
westi wrote:That's mad Alan.

modnrod Fahrvergnugen

978 posts · joined Mar 2011 ·

#1010884
😂

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#1010890
🤪

:P
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

modulus Veteran Volks Folk

2,009 posts · joined Jul 2003 ·

#1010894
HappyDaze wrote:When I was a lad, I was very keen on Kim NOVAK. 😵
Yep, she doesn't suck.
Peter Hill
1975 Type 2 Double Cab
modulus.com.au

HappyDaze Superannuated

2,887 posts · joined Jun 2009 ·

#1010903
Is that good or bad❓...
I'd rather wear a Beetle out by racing it than by polishing it!

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#1010912
HappyDaze wrote:When I was a lad, I was very keen on Kim NOVAK. 😵
Not bad in her heydey but looks like the jokers mum now 😂
madness is in the eye of the beholder 👍