After a couple of parts for my 1960 karmann ghia.
Need a drivers side front bumper section.
Door locks wih keys. Just need the barrels and keys not the whole handle.
And if anyone has a roof liner that isn't installed I could make a pattern off.
Thanks
Brad
goodluck. if you are missing the bumper piece then I suggest you try for a full stainless bar(1 piece) (search on his site). BUT don't throwaway the other 2 pieces. just maybe someone will need them.And the one overider is also worth keeping.
Yeah realising they are hard to come by the bumper sections. Had one tracked down but the guy went quiet.
Been considering making up my own section for it. As its a rat it doesn't need to be perfect.
i have a roof liner if you want to copy, i you can even have it after I just check fitting my new one is all correct. call me 0421 464 976 im in St Ives 2075
May have what you need. Will check stash.
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
Alan will give you a call tomorrow. I am at Brookvale so close by.
Thanks luftmeister, let me know how you go.
I may have a bumper section, I will check
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
I have 1, will send pm
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
.
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
Apologies for hijacking the post, but Steve (or anyone) have some decent euro over riders for a '63 Ghia? I don't think mine will re chrome very well.
Angus
Angus,
The overriders are cast Aluminium and they are generally quite thick material that can be linished/ground/sanded down to a smooth finish by the chrome platers during polishing & prep. Just make sure your electroplaters have the facilities to plate aluminium... not many chrome platers do aluminium these days... they are around, you just have to ring and ask...
Its a different chemical process and most don't do it because of lack of demand, but some most certainly still do...
Jason
Thanks Jason, I guess I'll see what they say when they see them.
Angus
