Skip to content
Aussieveedubbers

Dustless Abrasive Blasting - Anyone?

0 likes
Share Share on Facebook Share on X Share on Reddit

wombatventures Wolfsburg Wizard

680 posts · joined Feb 2013 ·

#1016562
I've been looking at Dustless Blasting now for a few months.
Have watched countless Youtube videos, spoken to the sales people for a couple of brands, tried to find anyone who does it locally and generally tried to work out if its the way to take the paint off my cars.

So who out there has tried it?
What's the verdict?

Here's a link to Classic VW BuGs...
DUBS BY THE RIVER 2021 Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#1016575
i don't think dustless and blasting could go together

I've had my cars grit blasted works good

What are you trying to achieve ?? with the dustless ??
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

wombatventures Wolfsburg Wizard

680 posts · joined Feb 2013 ·

#1016577
Dustless is wet sand blasting, uses less than 50% of the grit used in sandblasting. The water does most of the work and also stops the dust and debris going everywhere.
The benefits are that the water cools the metal which stops warping, clean up is easier, rust gingering is slower and surface result is much smoother.

I'm interested in how others have found the results, especially down the track after paint and putting the vehicle back in use.
DUBS BY THE RIVER 2021 Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#1016585
Ok yes I've seen a few shells wet blasted in leaves a residue on the surface which has to be removed prior to any paint

also its get IN every where just like grit blasting
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

wombatventures Wolfsburg Wizard

680 posts · joined Feb 2013 ·

#1016597
What's your suggestion for removing all paint from a shell? Is this the go or should I look at dipping or sanding?
DUBS BY THE RIVER 2021 Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#1016614
well I've had dipping for the flat panels guards doors engine and bonnet lids make sure you flush the seams good with some thinners leave the panels in the ho sun to make any excess solution sweat out of the seats

grit blast ( find a place that knows what there doing ) for the shell or the obviously rusted places lower door hinge areas etc

paint stripper for the flat sections on the shell but its time consuming

do u have a chemical stripping place in SA ?? the one here in sydney always changes the price
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

68BUS Wolfsburg Wizard

485 posts · joined Jul 2011 ·

#1016627
I am for blasting everything.
Dipping the full car is great but costs twice as much from what I can tell.
I have my whole bus blasted in and out and under for $2500. Including putting it back in primer.

Worth every cent as I had already mechanically stripped a lot of the bus and the metal was sound. After blasting all the paper thin metal dissapeared. Made for more rust work but if I have not had it blasted then there would still be paper thin metal in there. Would have made welding in those areas very difficult and quality of job would have been poor. Now at least it is all done right.

I used the same guy that blasts some of Das Resto cars and he was also recommended to me by someone else. Did a great job with no warping.
Maybe ask the local guys to you who they use over a yellow pages listed blaster.
1966 Aussie 11 Window

wombatventures Wolfsburg Wizard

680 posts · joined Feb 2013 ·

#1016636
Cheers 68BUS. Did you get wet or dry blasting. I've got the contact there already, mostly I'm trying to get a assessment on whether it is the best way to go.
DUBS BY THE RIVER 2021 Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!

68BUS Wolfsburg Wizard

485 posts · joined Jul 2011 ·

#1016663
Dry.
So it does take a bit of blowing to get all the stuff out after but worth the effort I think.
1966 Aussie 11 Window

nbturbo Veteran Volks Folk

2,171 posts · joined Dec 2002 ·

#1016675
do u have a chemical stripping place in SA ?? the one here in sydney always changes the price [/quote]

Minus Paint on South Rd-I have had 3 cars done and its the only way for me and a full Beetle was about $1500.Had the sunroof panel for my Oval blasted-told the jerk that the panel was rarer than rocking horse shit,but it still came back with more waves than the Pacific.Dave who used to have Minus Paint was a perfectionist with his work.Havent tried the new owner yet,but will need him soon for my next project.

wombatventures Wolfsburg Wizard

680 posts · joined Feb 2013 ·

#1016685
Cheers mate. I'll give em a call. Talked to that mob out on Churchill Rd at Cavan a month or so ago. Not really impressed.
Many Blokes up in Whyalla get cars blasted. I remember quite a few sweet rides when we were living there a few years ago.
DUBS BY THE RIVER 2021 Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!