I want to put a full time bed in my '77 bus. I want to put down a ply underboard and a matress on top. The problem is supporting the board at the foot end. Does anyone have a design for a removable support taht doesnt make holes in the walls etc. Thanks
I'm about to head off for a few days but when I get back I can post some pics of mine. If I haven't done it by about Wednesday bump this topic up to remind me.
[Edited on 10-10-2003 by Purple Martin]
1959 red & white Beetle
1975 Kombi camper
rig up a colapsable frame that can fold down and fit under your rear seat if u are keeping that in there.......
iam half way through doing this to my 75 bus. all the frame an bed are made but just havn't made it "pretty" yet. absolutely no new holes drilled and can be dismantled
let me know your email and i will send you some photo's when they are developed
Here is what I have done. (sorry no pictures as yet.....) I have got the middle seat on my kombi in place. i have had a box made up that takes up the space where the back seat goes. The lid is flush with the engine bay lid/top. The box sits in the position and is the full width of the vehicle. I have had it made so it has a hinged lid so you can store stuff (see heaps of it...) in it. It has a ply base that sits in between the two rear wheel archers and the front of the box comes up level with the back of the middle seat. Then I got myself a mattress from Clark rubber and had it cut to size and hay presto, one double bed with storage below! No cutting into the body work, no drilling and no screwing....
I will try to post some pictures in the future.
regards
Mick H
Ive got the deluxe bed in the back of mine!
Three mdf panels that stack on top of each other (over the engine) and then slot together with dowel pegs and then three legs that keep the last panel up.
I have left my rear seat in and its one that folds down and therefore supports the bed.
I have a $200 futon folded up on the panels and that makes it luxurious!!!
has any one got any pics of this stuff it would be greatly apreciated
i have some pictures of how i built a box in my square in the place of the rear seat.....but i dunno how different that is to ur bus's
jonno
"if only everything in life was made like a volkswagen"
hey
whats people like for gettin these things engineered so u can seat legal passengers on em??
cheers
rhys
it aint just cool its aircool'd
yeah johno could u post it on here neway
kombiluva wrote:.....and no screwing....
Maaate . . . . . i thought that was wat beds were for!!!!! ..... your missing out on all the fun hahahaha
😘kiss
yeah can sum one plz post sum pics of wat eva bed setup they have
Hi there,
Have a look at the attached thread; it may give you some ideas on what to do for a bed.
I designed the box myself and got it made by a cabinet maker. It is very easy to make, I just didn't have the time or tools.
if you have any questions, U2U me.
Regards
Mick H
http://www.aussieveedubbers.com/forum/viewthread.php?tid=15523good thread Kombiluva and I am inspired. Thanks
The bed/back seat in my 82 camper is simple and registered, with engineers certificate, to carry three passengers. It simply is a seat level with the rear engine cover so as that the seat and a mattress are level. The seat back can pull out and be inserted into the front of the seat to give extra length. To do this the seat back has two square tubes, one each side, that plugs into two square tubes at each side of the seat. There is also two square tubes at the front of the seat that the back will slide into. Simple, effective and legal to register. I will take some photos as soon as I can and post them.
1959 red & white Beetle
1975 Kombi camper
