Assembly of rear irs arms

cnfabo Custom Title Time!

1,353 posts · joined Apr 2008 · 16 Sep 2018, 2:08 pm

#1041043

Hi guys, I'm just dummy fitting my rear rotors and custom caliper brackets etc.. When I lightly tighten the hub nut the disc becomes really tight and hard to turn... Any ideas why??? It's never done this before...

Cheers fabo

vwo60 Veteran Volks Folk

2,036 posts · joined Feb 2007 · 16 Sep 2018, 6:49 pm

#1041044

Do you have a manual and are all of the spacers in there place, I am assuming that the caliper brackets are in place, have you tried tightening it up slowly while you are turning the hub and see if there are any marks where it is rubbing, Post a photo of your set up.

1 attachment · Log in to view

cnfabo Custom Title Time!

1,353 posts · joined Apr 2008 · 16 Sep 2018, 7:52 pm

#1041046

After some tinkering it all came good... Will let u know after final assembly

Cheers