Adam,
Just play around with it until you find the look/height that you're happy with. Dont forget that the car will sag after you adjust it but.
Steve
sikdub Wolfsburg Wizard
571 posts · joined Aug 2002 ·
(no subject)
kombi_kid Moderator Good Kid too many projects
124 posts · joined Aug 2002 ·
ad ya will after 2 splines! dont know what they use on them!
cheers
rhys
cheers
rhys
it aint just cool its aircool'd
kombi_kid Moderator Good Kid too many projects
124 posts · joined Aug 2002 ·
yer i see!
this is what ive been told
1 spline front no rear = ok
2 spline front 1 rear =gooooooodd
3 spline front 2 rear= DUMPED
cheers
rhys
this is what ive been told
1 spline front no rear = ok
2 spline front 1 rear =gooooooodd
3 spline front 2 rear= DUMPED
cheers
rhys
it aint just cool its aircool'd
kombi_kid Moderator Good Kid too many projects
124 posts · joined Aug 2002 ·
U2U sikdub he knows all about it!
cheers
rhys
cheers
rhys
it aint just cool its aircool'd
sikdub Wolfsburg Wizard
571 posts · joined Aug 2002 ·
Have emailed you adam... 🙂
Steve
Steve
Flintstones Custom Title Time!
1,077 posts · joined Aug 2002 ·
Adam, I notch is approx 1.5-2"
Hope this helps
Cheers
Hope this helps
Cheers
jonno-t3 Officially Full-On Dubber
289 posts · joined Apr 2003 ·
hey its prolly been asked before...but how do u lower the front and back on my type 3? 71 model square...do i need any special tools?
jonno
jonno
"if only everything in life was made like a volkswagen"
65square Seriously Crusin Dubber
191 posts · joined Sep 2003 ·
I assume you want to turn the torion bars for a free lowering job?? I used dropped spindles on my front end, no need to change shocks & you keep good ride quality. Does cost a bit though!
Adam_C Custom Title Time!
1,180 posts · joined May 2003 ·
i thought sum1 might have hacked my old name for a min hehe
yeh someone will post the link or the article of how to do it.... pretty simple process 🙂
cheers
adz
yeh someone will post the link or the article of how to do it.... pretty simple process 🙂
cheers
adz
Kai.A. Fahrvergnugen
915 posts · joined Sep 2003 ·
how much is a bit?65square wrote:I used dropped spindles on my front end, no need to change shocks & you keep good ride quality. Does cost a bit though!
i like dropped spindles and would personally consider them the best way to lower a front end(apart from the lack of adjustibility, but a worthwhile compromise). although i never realised they were available for type 3s, but then i've only owned my type 3 for a few days so i havn't really looked around that much at whats available etc.
kai
NigeType3 Officially Full-On Dubber
371 posts · joined Dec 2002 ·
Dropped spindles are about $200 US from CB performance
Cheers Nige:thumb
Cheers Nige:thumb
Unity-28 TOO LOW? NEVER
1,742 posts · joined Nov 2002 ·
I didnt know you could get spindles for type 3's!!!!!
N!
N!