How low can I go with a beetle 68 , I would like some feed back as how this is done I seen the black one on no h20 site and would like that look but with out the rear wheels seting in at the top.If this has been poted please let me know Ta seagull:bounce
Looking for that special lady : PM me for coffee & cake
as low as ur pockets go!!! if u just want a decent stance the buy some avis adjusters and adjust the rear by splines
cheers
rhys
it aint just cool its aircool'd
I have tride to get these in perth but no luck were you get them ?
Looking for that special lady : PM me for coffee & cake
vvds i think stock them??? maybe try mick motors or CBB
cheers
rhys
it aint just cool its aircool'd
theres porobably many posts about this, i know ive asked it b4, but from all the info i hav found, this is wat u always hear.
front end.
weld 2 adjusters (avis ect) into the front beam. this allows u to adjust the height manually by getting under the car and rotating the nut to the desired height.
this gives u like 4-6 inches of adjustment. but this will make ur ride very very firm unless u get some shorter shocks to compensate it, but will still b firm.
next u would get some dropped spindles. they can be exspensive, like over $500 for the pair, these drop ur ride height a further 2-2.5 inches whilst they maintain ur stock ride. a combination of the adjusters and spindles shuld get u low but reasonable ride quality.
rear.
for the rear u will hav the splines adjusted a notch or 2, depends how low u want to go.
i heard Custom bugs and buses in penrith do adjustable rear suspension.
after all that u will be very low.
and irs cars if ur 68 is irs wont hav the tuck in at the top of rear tyres like the earlier swing axles do.
who do u take ur car to in perth to work on it, find a vw mechanic
correct me if im wrong or left anything out guys
see, i hav been listening...😀
++++++++++++++++++++++++++++
One man's junk...
VWFOOL wrote:after all that u will be very low.
and irs cars if ur 68 is irs wont hav the tuck in at the top of rear tyres like the earlier swing axles do.
but '68s
are swingaxle are they not?
thanks for that info , I work on these my self ,but I have never got under one that has been lowed can I do the drop spindels my self welding I very good at paper on the wall I have ! has some one in perth got one to copy , seagull
Looking for that special lady : PM me for coffee & cake
i dont know cray
thats why i said 'if ur 68 is irs' coz i dont know about 68s...
++++++++++++++++++++++++++++
One man's junk...
VWFOOL wrote:i dont know cray
thats why i said 'if ur 68 is irs' coz i dont know about 68s...
ah ok, sorry
🙂Any of Volkswest, Vee Dub Repairs and Spares or Vee Dub Center should all be able to get you some adjusters for the front end.
I would reccomend Kurt at Vee Dub Repairs and Spares - he has owned a long string of show cars, his current being a 1303 with a supercharged, injected waterboxer in it. He can give good advice on what works, + can source most stuff for you.
If all else fails, look over east for the bits, as has already been mentioned, vvds or mick motors will prob have them.
