Adam_C Custom Title Time!
1,180 posts · joined May 2003 ·
the 28pictcarb has no spring return, how do i rig one up, can ne1 help me with it ?
spring return on 28pict carbie
Andy Andy\'s Adventures
2,820 posts · joined Nov 2002 ·
From memory, the stock one is a simple coil spring.
Try the wreckers if your close to one, or many bolt places/hardware stores have a range of springs. Sure to have one close.
:thumb
Try the wreckers if your close to one, or many bolt places/hardware stores have a range of springs. Sure to have one close.
:thumb
Old Dubber Wolfsburg Wizard
605 posts · joined Aug 2002 ·
Adam_C
Andy is correct. The early carbs had a simple coil spring approx 9mm dia 150mm long that fitted over the accel cable between the fan housing and the butterfly lever.
You can make a bracket similar to the later carbs that will use the normal spring.
Andy is correct. The early carbs had a simple coil spring approx 9mm dia 150mm long that fitted over the accel cable between the fan housing and the butterfly lever.
You can make a bracket similar to the later carbs that will use the normal spring.
Grahame
visit my club site at www.vwdcqinc.org.au
visit my club site at www.vwdcqinc.org.au
Adam_C Custom Title Time!
1,180 posts · joined May 2003 ·
bracket? hmmmm how would i fo bout that, will investigate gettin another spring 4 it too
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
Adam
Go and get a stock spring, clip, accelerator tube and spring retainer tube that goes through the fan housing or come and see me and i will find one for you.
Go and get a stock spring, clip, accelerator tube and spring retainer tube that goes through the fan housing or come and see me and i will find one for you.
I read it on FACEBOOK so it must be true
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
Adam_C Custom Title Time!
1,180 posts · joined May 2003 ·
if you have one dave, ill get dad to swing past on his way home from work and grab it, he works in belmore, if it meand hours of searching under your house in the parts depot, then ill save your knees and go visit lee at volkshaven.
cheers
and i owe you a few crownies for all the advice, ....... ill bring a case to valla hehe
cheers
and i owe you a few crownies for all the advice, ....... ill bring a case to valla hehe
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
Yep i will have to DIG around and find all the right bits. Give me a few days n i will try n get it together.
I read it on FACEBOOK so it must be true
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
Adam_C Custom Title Time!
1,180 posts · joined May 2003 ·
ok sweet, pop me a post or u2u when ya have tha bits,
thanks
adz
thanks
adz