Has anyone done this and what is the best method. I also need to remove and replace the cargo bay floor if anyone has any suggestions on how to and where to get a replacement it would be appreciated.
I used a angle grinder and cut through the tops of the spotwelds and the turned edge around it then just peeled it off. I need to replace the cargo floor in my 71 single cab and think i will just uses sheet metal, mabey checker plate.
Craig Torrens6 times Australian, 7 times State Hillclimb Class Champion
Hmmm, best not use my method then, as it destroyed the old tray😀 I took mine off before i new anything bout body work, so i had no idea a spot weld drill even existed🙁
They work well, they cut/drill from the outside edge of the drill,instead of the middle (concave drill), so they cut around the outside of the spot weld ! They have a small point in the middle to act as a guide hole. Use them on a slow speed and they will not damage the underlying panel/metal.
