Skip to content
Aussieveedubbers

1600tp in an oval????

0 likes
Share Share on Facebook Share on X Share on Reddit

sleeper Wolfsburg Wizard

478 posts · joined May 2003 ·

#123518
hi all,
just would like to know what would be involved in putting a 1600 tp in an oval.
can i use my stock gearbox?
would the electrical would have to be changed?
any other mods?

56astro Custom Title Time!

1,772 posts · joined Aug 2002 ·

#123560
Not sure how the 1600 will mate up to the 36hp tranny. I put a 1600 (1916) into my Oval but I already had a 1200 tranny in it. I had to clearance the bellhousing to fit the flywheel, change the starter motor and bushing to fit the 12V flywheel, not sure about the clutch throw-out (?) bearing).

Tinware needed to be trimmed to fit.

Converting to 12V = change bulbs, resisters to wiper motor and semaphores, change battery and maybe regulator. I had an auto electrician do all this work for me.

VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa

oval TOFU Bitte, ein Bit!

2,946 posts · joined Jul 2003 ·

#133953
this may sound like a stupid question, but wheres the best place to run the resistors for the semaphores etc?

and a even stupider Q, if the resistors are the 'normal' ones i used to flog from the physics lab at school, whats the safest method to attatch them to the electrical wire?

sorry bout the hijak
...and Robert's ya father's brother...

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#133957
I would run the in the front of car behind the wiring cover. Use a terminal block with screw lugs on it easy to mount easy to purchase from Dick Smiths
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

volma1 0428212510

529 posts · joined Aug 2002 ·

#134046
To fit a 1600tp into an oval I kept the 6v starter used a 1300 flywheel(has the same centre as 1600 and 6v teeth, and is 180mm, original 1200 clutch and plate and throw out bearing and changed everything else to 12v. Have very little change to tinware. The semaphores are ok kept 6v but make sure your flasher unit is 12v and works, or the semaphores may fry if they are out too long. I used a 12v kombi wiper motor and customised the original mechanism to fit. volma1
They are still there, just have faith you'll find one.

oval TOFU Bitte, ein Bit!

2,946 posts · joined Jul 2003 ·

#134222
cool cool

vw54 - you wouldn't have a lil' pic of the aforementioned terminal block would you? I'm not sparky minded...

ta

Tofe
...and Robert's ya father's brother...

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#134237
there white nylon type stuff with about 12 or so terminals along them just go to Dicks or Tandy n ask for a terminal block tehre about 3 bucks tops.
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

oval TOFU Bitte, ein Bit!

2,946 posts · joined Jul 2003 ·

#134467
:thumb
...and Robert's ya father's brother...