hey
reeady for panel work!!!!!!!!!! been bead blastered it is showing alot of work needed to do to it !!!!!!!!!! lucky the holidays are coming!!!!
it aint just cool its aircool'd
it aint just cool its aircool'd
Maybe a darker shade of primer, slam it, put it back together and drive it!!:thumb
Kruizin Kol
was thinkin about doing that but first the sills have to be replaced and a section infront of the rear wheel arch.
im going with the rhys look. dark beige bottom light beige top ,stanard wheels colour co-ordinated, white walls, dropped 3 inchs all around using rob king dropped spindles and torsion bar adjustment in the rear using a 1500 type 3 swing axle box and 1600 DP , safaris all round .
what ya think????
cheers
rhys:bounce
it aint just cool its aircool'd
good to see your making progress.
you need to reprotect it asap , even if you have to etch prime it, that close to the salt water its gonna rust quickly.
yer when the budget allows 😎
cheers
rhys
p.s. just muckin am gonna get onto it oneday!
it aint just cool its aircool'd
Ahhh, that rings a bell!! How,s it going Rhys?:kiss
.
well not much has happened got off my arse and went and got myself so panelbeating tools and am waiting on dad to get a MIG . i can seem to get the panelbeating im to un-co-ordinated 🙁
cheers
rhys
it aint just cool its aircool'd
the numbers are growing... u, me and the guy with the ute makes 3 kids with kombis.
WOOOHOOOOOO!!!😀😀😀
Reimagined/Recycled/Upcycled Cool
gotta start early!!!! one step ahead of all my mates and tryin to get them into veedubs aswell!
cheers
rhys
it aint just cool its aircool'd
thats going to be one hot splitty:thumb
hey
yer i hope it is!!!!!
cheers
rhys
Shit hot Rhys, it's good to see some more pics of ur progress. Keep it up matey.
Steve
there will be progress photos as progress happens!!!!!!!!!
cheers
rhys
it aint just cool its aircool'd
you should prime it as soon as possible as the rust has already started even though you can't see it.I use a ppg / dulux product called dp40 ,its an opoxy primer so it hangs on like shit to a blanket so to speak. the bonus with dp4o is that it is ideal for restorations like you are doing becuase you can leave it on the cars surface until you do the panel work, then do a section at a time maybe a door or 1/4 panel but leave the dp40 on & give it a quick sand with 180 dry sandpaper add another coat of it as you can put filler straight over the top and guess what the filler will adhere better than if was on bare metal. You will probably say what no filler on my car but it is not a bad thing if it is used correctly and you use top quality fillers and stick to one brand of paint ,if you mix and match brands you might as well put house paint on it .
This is my advise as i do this for a living and there is nothing better than seeing the car ten years later and it still looks as good as the day you finished it.
good luck ......glenn.:alien
hey glenn
you have u2u
cheers
rhys
it aint just cool its aircool'd
Yeah, when i first got my kombie all my friends told me i was stupid. They just weren't aware of the posibilities!!
©ya L8®
©h®i§
