Skip to content
Aussieveedubbers

Brand New Engines

1 like
Share Share on Facebook Share on X Share on Reddit
Log in to reply

VolksFolks Son of Jim - Creator of Good

2,869 posts · joined Dec 2003 ·

#142844
Anyone Know Who/Where Can i Source A Complete NEW (Not Reco) Motor For A Split, Have Seen Them Somewhere But Canna Remember, Think They Were From Brazil, Any Ideas Guys

Thanks Andy
They laugh because You are different, You laugh because They are all the same.

check out www.lowlight.com.au for low lights only..

buzzbug Praise the lowered

1,992 posts · joined Mar 2003 ·

#142868
I'm not 100% sure, but i thnk that Mick Motors had "new" motors for sale at some stage.
If you go into the VW business directory you may find them in there.
Oh yeah they are in brisbane too.
Lee.
some people are like slinky's
they have no useful purpose
but they are fun to watch
when you push them down the stairs

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#142904
he did the oil change it was full a metal bits , was all so purchased as a 1600cc , Pulled the heads of last week It was a 1500cc
The oil pump holes that go into the block were 6mm very strange ! also found the timing out ,so stripped the block all the bolts on the crank we loose !
I would not touch one .
Get a new case and do your own .
or buy the one I have in my shed .seagull
Looking for that special lady : PM me for coffee & cake

david Custom Title Time!

1,013 posts · joined Nov 2002 ·

#144059
there was a 1600 industrial motor with low hours in my local paper for $1100 i have one of these going in my split they are great just need a new dissy and carb
david

Peter Leonard Moderator Volatile

1,456 posts · joined Apr 2003 ·

#144084
often, when you run in a new motor, you get little aluminium flecks and sparkles and shiny silvery bits suspended in the oil on the first oil change (from machining and bedding etc and burrs). which is one reason why you do your first oil change straight after the first few minutes of running, and then one soon after (couple hundred k's) and the timing goes out, as do the valve clearances etc etc. maybe the motor was okay...:alien

you sure it wasn't just the usual stuff?

[Edited on 25-2-2004 by Peter Leonard]
let sleeping dubs lie

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#144266
Brazilian Motors or so called "new motors" also have a cast crank instead of forged.

In saying that they are OK for stockies and good donor motors for the other new parts !
I would just rebuild a secondhand 1600 :thumb