transmission oil

bigbruvabob Officially Full-On Dubber

216 posts · joined Jul 2003 · 10 Apr 2004, 12:27 pm

#159189

Hi i want to change the trans fluid in my girls roadster and am unsure as to how much to put in mr muuirs book says to be sure not to put in to much but then does not tell you hou much to use. Doh!Also can anyone recomend a brand

*did*

0 posts · joined Sep 2003 · 10 Apr 2004, 1:15 pm

#159196

Just put in enough so that it is up to the bottom of the fill hole on the side of the gearbox. I assume its manual.
Shell sells 1 and 4 litre bottles of 80-90 GL4 (i think 80-90 is right, somebody?) gearbox oil and i believe this is the correct type.

bigbruvabob Officially Full-On Dubber

216 posts · joined Jul 2003 · 10 Apr 2004, 1:51 pm

#159203

cheers 90 hypoid is what mr muir recomends now to find a 17mm hex head

*did*

0 posts · joined Sep 2003 · 10 Apr 2004, 2:04 pm

#159209

now to find a 17mm hex head

yeah i need me one of those too!

tonyg Seriously Crusin Dubber

174 posts · joined Oct 2003 · 12 Apr 2004, 7:00 am

#159697

use a 17mm bolt, either bent or with vice grips. Head fits hole

they took me away haha, hope the medication works

tonyg Seriously Crusin Dubber

174 posts · joined Oct 2003 · 12 Apr 2004, 7:00 am

#159698

use a 17mm bolt, either bent or with vice grips. Head fits hole

they took me away haha, hope the medication works

Che Castro ankle straps

1,945 posts · joined Aug 2002 · 13 Apr 2004, 9:40 am

#160324

the 17mm allen isnt too hard to find, i think its a GM Holden tool as well. If not you can always weld two 17mm together. Filling it is messy and kinda difficult.

I've used a funnel and hose in the past. It takes a while for the oil to get down to the axles and through all the cogs, so fill it up till it overflows, then wait a few minutes and repeat until it wont go anymore.

Use GL-4 rated oil - GL5 may corrode the syncros

Jon

mnsKmobi Wolfsburg Wizard

589 posts · joined Aug 2002 · 13 Apr 2004, 11:14 am

#160352

I used Penrite 80w-90 Hypoid gear oil in my kombi gearbox. It is a GL5 oil that is ok with brass and such like.

I tried the old 17mm bolt trick and it didn't work. Then I found a 17mm hex drive for under $10. Much better!

oval TOFU Bitte, ein Bit!

2,946 posts · joined Jul 2003 · 13 Apr 2004, 12:42 pm

#160397

hey Steveie
I've got a hex if ya wanna borrow it...

...and Robert's ya father's brother...

BiX Veteran Volks Folk

2,499 posts · joined Sep 2002 · 13 Apr 2004, 12:45 pm

#160400

just go to a tool shop, not a hardware shop a proper tool shop like glenfords etc and they normally carry a 17mm hex head socket

I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 13 Apr 2004, 12:57 pm

#160403

AutoOne = $14.95 for a Kingchrome Hex thingy !