Skip to content
Aussieveedubbers

Type 3 tech

0 likes
Share Share on Facebook Share on X Share on Reddit

paulr Officially Full-On Dubber

332 posts · joined Aug 2002 ·

#15846
I have just purchased a 1970 Type 3. My intention is to use the bits of it on my 64 type 3 – front discs, engine, IRS eventually and rear brakes plus whatever else fits or is useable. Initially I intend to change the engine over. What I want to know is can I use the 12 volt flywheel and clutch, starter etc (my cars is 12 volt converted – 6 volt starter) with the swing axle rear – or do I have to use all the existing clutch etc.?

I also saw a post ages ago about what bits are adaptable across type 3 s but can’t find it again – can anyone point the way?

I will also be wrecking the rest of the car (70 fasty) after X mas – it has great rear panels, pop out windows, as new red rear seats so let me know if you are interested in stuff.

Cheers
:bounce
Dazed and Confused
and riding a pushi

kombi_kid Moderator Good Kid too many projects

124 posts · joined Aug 2002 ·

#15848
its red interior right? im after a drivers seat red covering in good condition as the one on dads car is faded and ripped in some places! its amazing how good the interior on some is especially dads!!!
cheers
rhys
it aint just cool its aircool'd

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#15850
Yes you can use the 12V flywheel in the 6V swing axle gearbox.

You have to grind the bell housing away slightly on about 4 points untill the outside dia of the flywheel fits right into the 6V bellhousing. If you can get a lend of a 12V flywheel, it would make it easier to fit it up to the bell housing when grinding.

Also get and adaptor starter bushing for the starter motor end shaft. these are available from VVDS and probally many other shops as well, but i am only going to tell you that because i know for sure.

the brakes and irs rear should also fit OK.
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

paulr Officially Full-On Dubber

332 posts · joined Aug 2002 ·

#15855
Thanks Guys

The interior is red but the front seats covers are shot .

Excuse my ignorance but WDS is ???
Dazed and Confused
and riding a pushi

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#15857
V V D S
Vintage Vee Dub Supplies :jesus
Futue te ipsum!!!

SKEWtYpe3 Custom Title Time!

1,859 posts · joined Aug 2002 ·

#15940
Hery Paul R can i put in for 1st dibs on parts when u start wrecking please

Ta !

James

paulr Officially Full-On Dubber

332 posts · joined Aug 2002 ·

#18683
Anyone in Melbourne got an early type three with the rear engine mounts welded in that i could have a loook at. I have the engine and IRS sitting on my shed floor looking for a new home in the notch

Paul

Give me a call Skewy 93809262 ah

[Edited on 6-1-2003 by paulr]
Dazed and Confused
and riding a pushi