Skip to content
Aussieveedubbers

stretch vw

0 likes
Share Share on Facebook Share on X Share on Reddit

Purple Martin Fahrvergnugen

913 posts · joined Feb 2003 ·

#181450
I'm thinking of building a stretch vw bus. Let me know what you think of the idea!
http://www.stretchvw.com
1959 red & white Beetle
1975 Kombi camper

twoguns simply aircooled

4,275 posts · joined Nov 2002 ·

#181453
be carefull. ive heard rumours that they are more difficult to get passed due to rule changes. obviously youve seen CBB's. theirs got rego'd but apparently others cant now. so check it out.

i was thinking this...

1 attachment · Log in to view

Simply Cruzin'...

twoguns simply aircooled

4,275 posts · joined Nov 2002 ·

#181455
roof up...

1 attachment · Log in to view

Simply Cruzin'...

twoguns simply aircooled

4,275 posts · joined Nov 2002 ·

#181456
or this was the alternative taht a mate was thinking...

1 attachment · Log in to view

Simply Cruzin'...

twoguns simply aircooled

4,275 posts · joined Nov 2002 ·

#181458
we were thinking same lines. take sections from one and graft into other. big motor conversion, kit it out and whalla.

1 attachment · Log in to view

Simply Cruzin'...

rustybus Commited Dubber

67 posts · joined Jan 2004 ·

#181548
they look SWEET!!
DRINK UP AND BE JOLLY

twoguns simply aircooled

4,275 posts · joined Nov 2002 ·

#181569
poor jobs will look warped
Simply Cruzin'...

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 ·

#181823
I am in the process of building a limo at the moment for someone and there is quite a bit of engineering involved but a lot of it is actually simple when broken down.
The biggest factor is weight.
Load rating for the axles is not to be exceeded.
The structural strengthening must be strong and light so as to not make the vehicle too heavy.
Bigger box sections with light walls give stronger torsional and anti- twisting strength.
The engineer I am working with stipulates very strongly nothing to be thicker than 3mm plate or wall thickness.
A lot of the RHS being used is 2mm wall thickness to keep the weight down.
Gussets in corners is important.
Front suspension bolt down points must be tied to the rear suspension bolt down points to tie both suspensions together. This does not have to be a piece of railway line by any means, but for the stretch we are doing a 25 x 50 rhs was needed.
EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

twoguns simply aircooled

4,275 posts · joined Nov 2002 ·

#181825
i heard rumours that indian could not get theirs rego'd even after all the talk he has on his site re approval this and that. is it true you just are not allowed to stretch them anymore?

and yeah i did seriously think aobut it. it doesnt seem that it would be too hard.
Simply Cruzin'...

Purple Martin Fahrvergnugen

913 posts · joined Feb 2003 ·

#181870
hmmm axle load rating could be a problem, especially once a full-on interior is fitted and also if there's a big non-vw motor. Thanks for the info.
1959 red & white Beetle
1975 Kombi camper

Bumpstopbus Casual Dubber

22 posts · joined Jan 2004 ·

#181963
It would pay to chat with Mike @ CB&B's Sydney
He did the bay with 308 and would definetely have a lot of information on stretchin buses.
Cheers
Dianne

Cruzin in a Golf Wolfsburg Wizard

406 posts · joined Oct 2003 ·

#182109
you can always try this instead
<hr>"I choose to Cruze VW Golf Mk1 Style!!!"

Anthiron The Baja Rejuvenation Begins

4,936 posts · joined Oct 2003 ·

#182112
i was thinking today about a strech Manx....using a kombi pan and having an extra back seat....im not sure of demensions or if its even possible but it would make a cool beach vehicle for the whole family.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom