She\'s a BIT LOOSE

Well...
My buggy is a little loose in the steering, but befor I go and get a new Steering box and install it I need a week or two more out of my baby..

So, She has a king Pin frontend and I have noticed that there is a nut ontop of the box with a small rod jutting out that has a slot to fit a Phillips head screw driver...
Now this looks similar to my old celica and I should just loosen the nut and then tighten up the rod a little and tighten up the nut again.

Which way.. I do not want to force it to much but which way (Clock wise/Anti Clock) does the nut loosen and which way will tighten the slack in the Steering Box...?

Was keen to ask the experts before I get to far into it..!

Thanks, Dean...