bobupp Seriously Crusin Dubber
111 posts · joined May 2004 ·
Need to " tighten" my running boards as they are loose. Is this as simple as it seems, tightening the bolts that run out in to the guards?
Running Board Repairs
Grey 57 Old Grey Cruiser
2,937 posts · joined Aug 2002 ·
There are about 5 x 10mm bolts that ruin along the lenght of the running board and hold it on to body. make sure these are tight too. You may find that the running board has slipped up and off these bolts causing it to swivel on the bolts that hold it onto the gaurds.
Make sure you give all bolts a good soak in penetrating oil before you out a spanner on them. Snap them off and you will have a much bigger job to do. Good luck.
😉
Make sure you give all bolts a good soak in penetrating oil before you out a spanner on them. Snap them off and you will have a much bigger job to do. Good luck.
😉
warb gimme some butter im on a roll.....
1,983 posts · joined May 2003 ·
good advice.. I have snapped a few....
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
I believe that running boards were a German invention and thats why they lost the War...
Which war... well.. 1st world war and errr 2nd world war...
Running Boards can Make any Man cry.... Why???
Try putting the B****** On... they don't seem to fit right...
They NEVER seem to fit right... New or used..
the 10mm bolts want to jump out of the slots...
and then the Mudguard bolts - well, they are another story -
I believe the correct way - is to undo all the mudguard to body bolts and let the running board bolts pull the mudguards in, so they touch each other... with a rubber washer in between them.... this might sound easy....
but it isn't...
I remember reading about a fellow who bought two new running boards, took the old ones off... and proceeded to fit the New Running boards... They Didn't fit..
or so He thought... He measured the old running boards and then the New Running boards...... Both were identical...
I rest My Case.....
I mean board.....
Lee - I hate Running Boards - Noonan
Sun Roofs are just as hard.... too 🙂🙂
Someone should Blow them ALL UP 🙂🙂
Which war... well.. 1st world war and errr 2nd world war...
Running Boards can Make any Man cry.... Why???
Try putting the B****** On... they don't seem to fit right...
They NEVER seem to fit right... New or used..
the 10mm bolts want to jump out of the slots...
and then the Mudguard bolts - well, they are another story -
I believe the correct way - is to undo all the mudguard to body bolts and let the running board bolts pull the mudguards in, so they touch each other... with a rubber washer in between them.... this might sound easy....
but it isn't...
I remember reading about a fellow who bought two new running boards, took the old ones off... and proceeded to fit the New Running boards... They Didn't fit..
or so He thought... He measured the old running boards and then the New Running boards...... Both were identical...
I rest My Case.....
I mean board.....
Lee - I hate Running Boards - Noonan
Sun Roofs are just as hard.... too 🙂🙂
Someone should Blow them ALL UP 🙂🙂
1 attachment · Log in to view
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
bobupp Seriously Crusin Dubber
111 posts · joined May 2004 ·
Oh goody goody, no wonder they are loose. Probably have been for a looong time.
However I will try!!
However I will try!!
Freddie Fender Officially Full-On Dubber
328 posts · joined Jun 2004 ·
Have fun. If you have bought Brazilian replacements I would recommend investing in a Dremel to make them fit. The holes dont even line up. THe Mexican or German ones mount much easier.