porsche dials for sale, 16x7 wheels and tyres,retreats with good meat ...
sell with the wheel adapters to suit 4 stud,
rims in good conditon,no gutter damage,could do with a polish...
$750.00
ono...
wrecker67@tpg.com.au
riverstone nsw
2765
like pick up only unless you make arrangments.....
[Edited on 27-10-03 by wrecker67]
To follow the path: Look to the master, Follow the master, Walk with the master, Become the master
tyre
To follow the path: Look to the master, Follow the master, Walk with the master, Become the master
adapter made from steel not alloy..
tyres 205/ 50/16.
[Edited on 27-10-03 by wrecker67]
To follow the path: Look to the master, Follow the master, Walk with the master, Become the master
Do you have a photo of the adapter mounted on a disk and drum ?
[Edited on 6-11-2004 by 1964_Notch]
if you search back in type 3 rides you will see them on my old 69 square back..
they bolt to the 4 stud with the 3 bolts that come with them and the forth is a long bolt which goes on with the wheel,then use standard wheel bolts..cheers.
To follow the path: Look to the master, Follow the master, Walk with the master, Become the master
did you have any clearance issues with 205 tyres on the squareback? did they rub much when turning etc?
cheers
kai
there did not seem to be a problem,typeone had these wheels on his notch .until he sold the car and had no problems.and they look great on a type 3...
cheers
To follow the path: Look to the master, Follow the master, Walk with the master, Become the master
cool.
do they come with all the bolts?
kai
great deal! but too bad I'm in Melb 🙁
Step into my office , lets talk!! Check your u2u
Dan😉
[Edited on 6-11-2004 by dannyboy67]
"If i had to explain you wouldnt understand"
The Lower Class
Pending a stewards enquiry these have gone!
Dan😉
"If i had to explain you wouldnt understand"
The Lower Class
sold...
cheers danny...
To follow the path: Look to the master, Follow the master, Walk with the master, Become the master
Sweet as!!! How do i find pics of your cars and t1 notch???
Nice one
Dan😎
"If i had to explain you wouldnt understand"
The Lower Class
Too slow I am.....like the dials I do, would have been good for my wifes '68 bug....went to a good cause so that mekes it ok....
Danny hows the notch coming along ? I have now turned my attention to my wifes car since the Torana is now finished !
See members rides for updates on the Notch. All's going well and my ideas are now starting to come together. Will be in the panel shop for 2 months getting some small areas welded and some fresh paint. Gives me time to try and get everything else sorted. Hoping for around Feb / March to be ready for rego and all tuned up! Should be a cool ride hopefully , the rims are exactly what i wanted , something a little different and in keeping with the mods to the car!
Cheers Dan
"If i had to explain you wouldnt understand"
The Lower Class
1964_Notch I have a set for sale for 350 that are pretty nice, they will need a visit to a wheel house to true a couple of them but you would still get out of it for the same sort of cash. I'll post a advert with a picture..
