Hi guys,
Urgently need the flywheel bolt torque settings..cannot find them on the net anywhere.
Help me Obi-Wan Kenobi, your my only hope!
Matt
boof2332 Custom Title Time!
1,210 posts · joined May 2004 ·
Help!!!! Torque settings ej20t..urgent!
seagull Compulsive Aussie Vee Dubber
4,979 posts · joined Dec 2003 ·
74 nm will do the trick , use 277 thread locker so they dont come loose and stuff the crank !
dont for get I need your old stock flex plate bolts ( please )
dont for get I need your old stock flex plate bolts ( please )
Looking for that special lady : PM me for coffee & cake
boof2332 Custom Title Time!
1,210 posts · joined May 2004 ·
No Problem...still have them, minus the 2 we had to drill.
You would not believe what happened....lock tight and torqued up..all was fine till the clutch bolts. Was used to the crank bolts and nipped one too quick and snapped off the first one.....
engine will have to wait till later on in the weekend.
Thanks seagull for the quick call...
Matt
You would not believe what happened....lock tight and torqued up..all was fine till the clutch bolts. Was used to the crank bolts and nipped one too quick and snapped off the first one.....
engine will have to wait till later on in the weekend.
Thanks seagull for the quick call...
Matt
Jenny Officially Full-On Dubber
352 posts · joined Jun 2003 ·
Matt,
the torque settings should have come with the fitting instructions for the adaptor plate and modified flywheel.
I don't have them because it was already fitted when I bought the car, but on the ricola site http://www.ricola.co.uk/KEPfit.htm he torqued the flywheel bolts to 50ft/lbs.
the torque settings should have come with the fitting instructions for the adaptor plate and modified flywheel.
I don't have them because it was already fitted when I bought the car, but on the ricola site http://www.ricola.co.uk/KEPfit.htm he torqued the flywheel bolts to 50ft/lbs.
seagull Compulsive Aussie Vee Dubber
4,979 posts · joined Dec 2003 ·
No probs Matt
Looking for that special lady : PM me for coffee & cake
speedster356 Plastic not Classic Racing
1,624 posts · joined Aug 2002 ·
Flywheel bolts are 69-75 Nm or 51-55ft lbs
the clutch bolts are 15.7 Nm or 1.1ft lbs
cheers
the clutch bolts are 15.7 Nm or 1.1ft lbs
cheers
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
Jenny Officially Full-On Dubber
352 posts · joined Jun 2003 ·
speedster356,
I think you had a typo, 15.7Nm is about 11.6ft/lbs, not 1.1!
I think you had a typo, 15.7Nm is about 11.6ft/lbs, not 1.1!
speedster356 Plastic not Classic Racing
1,624 posts · joined Aug 2002 ·
Yikes , sorry bout that........that would be almost hand tight!!!
cheers
cheers
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
seagull Compulsive Aussie Vee Dubber
4,979 posts · joined Dec 2003 ·
well what can I say Peter us fitters did not get it right !
um what was the lenth of the * new bolts * for the fly wheel Matt ?
um what was the lenth of the * new bolts * for the fly wheel Matt ?
Looking for that special lady : PM me for coffee & cake
boof2332 Custom Title Time!
1,210 posts · joined May 2004 ·
Did not measure them..
All new bolts for the clutch also and the motor is back in...hopefully only a week or so to go....hopefully.
Matt
All new bolts for the clutch also and the motor is back in...hopefully only a week or so to go....hopefully.
Matt