Turbo parts include.
Rebuilt RHB5 IHI turbo,custom to suit 1776cc by ATS,
with integral adjustable wastegate and new hoses and fittings.
Including exhaust flange.
Air to air intercooler.
New Malpassi boost sesitive fuel pressure regulator.
New full dual carburator,Dellorto turbo upgrade kit.For 40mm DRLA’s.
Including throttle seals and velocity stacks.
New Eagle #300 turbo grind cam and lifters.
New adjustable cam gear
Location, Perth
Cost me over $1500 will sell for $1000.
Email for more pics if your interested.
Email....choppaxs@hotmail.com
Thanks for lookin
Mark
[Edited on 3-3-2005 by choppa]
Turbo
email sent.
Pic
This is a bargain!
that is damn cheap!!!! someone buy it before i do!!! please santa can i have this for christmas??
cheers
rhys
it aint just cool its aircool'd
How tempting is that and cheap. Too close to crissie for me and the wife would kill me.
Whats the estimated PSI range.
How much work to get it fitted?
with an intercooler i would say 20 PSI isnt out of question!
cheers
rhys
it aint just cool its aircool'd
That would be interesting. Need wheels?
I've got some 4 stud empi sprint stars, powdercoated silver with centre caps and 145 and 165 michelin tyres. These are in show car condition.
I'd be interested in swapping these since I'd rather have the turbo setup sitting in the corner of my garage waiting for a rainy day.
CYA CT
esratrams
noo musn't argghhh the urge is too str..... noooooooooo
i think 20psi is a bit of a high figure :S. maybe with a water to air intercooler.
but still it would make a vw motor to boot.
im also interested.
Anthony
just rang mark then. he said it is set up to hold a max of 12psi.
But where to put the intercooler?
dunno. i think some put it near the back wheel. not sure. talk to ian swinkles about that. he has a 1641cc turbo FI motor that makes about 200hp at the wheels i believe with his new intercooler.
Anthony
something i am curious about though is...wat intercooler is it? is it a standard skyline intercooler?
Anthony
I think the intercooler was for a Saab?
No too sure.
My plan was to fit this unit in the parcel tray behind the back seat.
Turbo on left and intercooler in middle/on right.
Obviously with the floor cut out and a new raised one fitted.
Either a water spry or fan ,or both on the intercooler.
but the best option would be to box in the cooler and liquid cool it,with a remote mounted raidiator.
The Turbo is now set up for aprox 12 Psi max,on a 1776cc engine.
Tho the bloke at ATS said if i didnt like it ,he could change the cover on the turbine to get more or less boost,etc etc,no problems.
im surprised this hasnt sold yet common guys if i wasnt such i a tight arse i would buy it!!
cheers
rhys
(bump)
it aint just cool its aircool'd
just wodnering if its still for sale? and how much work it would be to fit it to my 1800 if at all???
can you email some more pics to
kombi_dave@hotmail.com
[Edited on 20/1/05 by Davecho]
'73 Bay - Fergus
its still there dave ,I give mark a call and let him know , seagull
marks just got back from over seas
[Edited on 23-1-2005 by seagull]
Looking for that special lady : PM me for coffee & cake
sweet cheers dude... just wondering how hard it is to put that into my 1800 kombi... still new to the kombi and vw scene
'73 Bay - Fergus
You would need to make the pipe work up .I have seen this gear Dave its as it says .Very good buy at the price asking ( I think )
Looking for that special lady : PM me for coffee & cake
god its soo tempting if its as simple as pipe work!!! gotta convince the bank manager (girlfriend) to let me do it.. its half hers too!
'73 Bay - Fergus
The cam is for a 1776 but it would move along a 1800 cc stock motor quite well , Others ideas please !
Looking for that special lady : PM me for coffee & cake
whats the diff between an 1800 and a 1776?? never understood what all the odd displacements were??:alien
'73 Bay - Fergus
"Tell him 'We've already got one'"
Oasis u have u2u
Looking for that special lady : PM me for coffee & cake
I have tryed to call mark no luck sorry
Looking for that special lady : PM me for coffee & cake
Davecho
Sorry but the cam is for a type 1 engine (Beetle).
Im assuming your 1800cc is a type 4 engine in a late bay window bus.
If so then this cam wont work.
Everything else will work tho.
Mark
