Skip to content
Aussieveedubbers

Is my trans-axle any good?? (another question!!)

0 likes
Share Share on Facebook Share on X Share on Reddit

Chewy Fahrvergnugen

889 posts · joined Jul 2004 ·

#286172
I have a tranny here which I have never properly driven and dont know if it is decent..
There were very minute metalic particals on the magnetic drain plug when I drained the oil, is this normal?
The input shaft into the box also wobbles around a bit, but I know for a fact that the oil seal is completely shot, is the wobbling normal?
The oil is black but doesnt have a metalic tinge to it and I looked at the reverse gear through the oil filll plug and it is fine.

Does it sound like it would be ok?

Question #2
Well just today I noticed the second drain plug under the diff.. took out plug and it has a heap of pieces of spring stuck to it.
The springs pieces appear to be the type used on grease seals, like an O-Ring made out of a spring.

Any ideas where this came from, is there a seal somewhere in the tranny that uses on of these types of O-ring springs?

Please help!



[Edited on 3-1-2005 by Chewy]

[Edited on 3-1-2005 by Chewy]
.

Chewy Fahrvergnugen

889 posts · joined Jul 2004 ·

#286175
Actually there is a small amount of miniture metal specks in the oil.
.

Anthiron The Baja Rejuvenation Begins

4,936 posts · joined Oct 2003 ·

#286247
the metallic specks u see are probobly bits of syncro that have worn away and if worn syncos dont bother u then this isnt a major problem. as for the play in the input shaft i have no idea.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom

Chewy Fahrvergnugen

889 posts · joined Jul 2004 ·

#286249
Thanks, just hoping its not a bearing starting to let go :puke
.

Menangler Custom Title Time!

1,991 posts · joined Aug 2002 ·

#286338
If the metal particals are stuck to the magnetic drain plug they would be bits of bearing or gears, it is normal to have a bit , but not big bits of cause.
Syncros are made of bronze and don't stick to the drain plug so its a bit hard to tell if they are ok with out driving it.
A bit of wobble in the input shaft is normal too.
FAHRVERGNUGEN;
Description of a pleasurable sensation,
Experienced when a car and it's driver are in mutual harmony, A unique driving experience, Pleasure, Satisfaction,
A feeling experienced by Volkswagen Drivers.

Chewy Fahrvergnugen

889 posts · joined Jul 2004 ·

#286511
Ahh sweet, sounds like it'll be worth putting in..

Its a 1200 66 box, are these very tuff? Are there any problems I should watch out for?
.

Chewy Fahrvergnugen

889 posts · joined Jul 2004 ·

#287128
Well just today I noticed the second drain plug under the diff.. took out plug and it has a heap of pieces of spring stuck to it.
The springs pieces appear to be the type used on grease seals, like an O-Ring made out of a spring.

Any ideas where this came from, is there a seal somewhere in the tranny that uses on of these types of O-ring springs?

Please help!
.

Chewy Fahrvergnugen

889 posts · joined Jul 2004 ·

#293024
anyone?
.