For Sale MSD Multiple Spark Discharge 6AL *SOLD*

1303 Officially Full-On Dubber

250 posts · joined Sep 2003 · 19 Dec 2004, 8:56 pm

#281749

For Sale MSD 6AL Multiple Spark Discharge Ignition.
Comes with wiring harness/diagram ,Plug in Rev Limiting modules 3000,6000,7000 and 8000 rpm. The unit is under 12 months old and is in perfect condition with not a mark on it. Check the link for the run down.
I paid $485 for it

http://www.msdignition.com/ignition_6.htm

Sell for $380

Paul
Erina
0410 309 979

[Edited on 19-12-2004 by 1303]

[Edited on 4-1-2005 by 1303]

1303 Officially Full-On Dubber

250 posts · joined Sep 2003 · 2 Jan 2005, 9:04 pm

#286878

Bump

Dannyboy half man , half horse

2,306 posts · joined Jan 2004 · 2 Jan 2005, 9:50 pm

#286909

What would the ideal ignition be to go with that?

Cheers Dan😉

"If i had to explain you wouldnt understand"

The Lower Class

1303 Officially Full-On Dubber

250 posts · joined Sep 2003 · 3 Jan 2005, 7:38 pm

#287217

Anything really, as the ignition only switches the MSD. I did run Pertronix with this System but points can be used. If you use points there will be minimal wear on the contacts due to less arking because there is only switching current through the points instead of the normal load of switching the actual coil.
You will still need to set the points periodically as the rubbing block will wear as per the standard set up.

The good thing about the MSD is it sparks for a full 20 degrees crank rotation under 3000rpm which helps burn all the fuel .... thats when good things happen.