Skip to content
Aussieveedubbers

Whats the best brand of 'rust stopper'??

0 likes
Share Share on Facebook Share on X Share on Reddit

Gibbo Custom Title Time!

1,685 posts · joined Jun 2004 ·

#302316
Evening all,

Im just after a product that will convert and seal in the rust I have found around my cars. Something that I can paint on and eventually paint over. Just surface rust really nothing involving a hole.

Any pointers gratefully received!

Cheers

StenGuns Veteran Volks Folk

2,147 posts · joined Mar 2004 ·

#302330
These

[Edited on 2-2-2005 by StenGuns]

1 attachment · Log in to view

Che Castro ankle straps

1,945 posts · joined Aug 2002 ·

#302429
from what the teachers at TAFE have told me:

rust converter is sort of a 2 edged sword. To convert rust it needs to be corrosive, and sometimes that can be a bad thing and go a bit too far.

oxidisation cant occur without oxygen, so if you seal it completely from the atmosphere it will stop it in its tracks.
Jon

BiX Veteran Volks Folk

2,499 posts · joined Sep 2002 ·

#302582
personally, rust converter, then use fish oil. then paint ove it
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!

Doug Sweetman Nil Bastardo Carborundum

2,128 posts · joined Sep 2002 ·

#302583
Where you can get at the rust, clean it back to bare metal (bright bare metal), etch prime it, primer filler and then top coat.

Where you cant get access to it - such as inside the heater channels and what not, use the rust coverter, fishoil method.

In the UK they spray a wax product inside sills and double skins for rust protection - anyone got any experience with that ?

NigeType3 Officially Full-On Dubber

371 posts · joined Dec 2002 ·

#302584
Can you paint over fish oil ?

57kombi Hannover Elder

2,544 posts · joined Aug 2002 ·

#302591
Doug I have used the wax product in the U.K wax oil.
it is not bad but stays a bit soft and is a bitch as it gets everywhere. There is also a product called body shultz, this is supposed to stop rust getting at the parts but when it hardens it cracks and allows water underneath.

For the best rust protection, have it blasted and then paint it with POR15.
Cheers
Dave

NigeType3 Officially Full-On Dubber

371 posts · joined Dec 2002 ·

#302600
POR 15 DO A RUST CONVERTER AS WELL

kustomkool BEING KOOL AINT CHEAP

1,611 posts · joined Nov 2002 ·

#302614
akean is always talking up renix

mnsKmobi Wolfsburg Wizard

589 posts · joined Aug 2002 ·

#302717
NigeType3 wrote:Can you paint over fish oil ?
Yes. I use the Kill Rust primer to paint over their fish oil. No problems so far.

akean1 Remember To Love

1,088 posts · joined Dec 2004 ·

#302751
i use a lot of ranex rustbuster, can also be used to polish out rust spots on chrome, can be used as flux if you feel like it..
i was reading about a product called master coat (dont know if it is available in aus) stops moisture and oxygen, if any body knows where to get this ,i would be verry interested:thumb

toplessbug Fahrvergnugen

879 posts · joined Aug 2002 ·

#302906
if you can ,get into it with a heavy wire brush then cold gal it , white knight make cold gal ,around $100 for 4 liters and be careful when you pick up; a can will give you a hernia , stops rust in its tracks

greenbus Commited Dubber

63 posts · joined Feb 2004 ·

#302932
Rust bullet is meant to be the bomb - although not readily available in oz yet. Have contacted them and they say they're negotiating with potential distributers.