Porsche 930 CV joint install...which way do they go?

reub VWRX is gone...

2,054 posts · joined Sep 2002 · 16 Mar 2005, 1:06 am

#319626

Can anyone tell me if the notched side of the cv joint goes to the outside or inside (shown to the left hand side in the pic attached)? Any help is appreciated.

Reub

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 16 Mar 2005, 6:55 am

#319654

u2u Alex Holzl

His brother and father has just installed a couple of sets

Futue te ipsum!!!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 16 Mar 2005, 4:14 pm

#319927

Try fitting it to the output drive shafts, is it stepped down at all.

If not it shouldnt matter...

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Baja Wes V6 Baja Pioneer

3,119 posts · joined Aug 2002 · 16 Mar 2005, 8:34 pm

#320163

I had the same problem with my kombi cv's. I found various VW manuals which showed conflicting photos and diagrams. So I never actually figured it out. The inner is supposed to go a certain way though

Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... 🙂
www.taylorcycles.com.au - My DH MTB racing brothers shop.

jnr356 Wolfsburg Wizard

603 posts · joined Jan 2004 · 16 Mar 2005, 9:56 pm

#320262

doesn't really matter
but i always install them notch out
(you can turn them around when they're worn,thats what we do for the tight arses)