type3lover in the garage...
796 posts · joined Feb 2005 ·
I got into the kombi to go to work this morning and it wouldn't crank over at all. Opened the engine lid and noticed that the carb on the right had petrol all over the outside and had run down the manifold and even leaked onto the ground.
Then I managed to get it to crank over and saw heaps of fuel vapours coming out the exhaust. Had to remove the plugs on cylinders 1 & 2 and then crank the starter to expel all the fuel that had filled the engine overnight. Also took off the carb and checked needle and seat for any any sign of sticking, tightened everything and put it all back together. Runs fine - no leaks. Basically the cylinder full of fuel was "hydraulicing" - since liquid cannot be compressed as the piston tries to travel up the bore and that's why it wasn't cranking over at all.
BUT...this is the second time this has happened now. Last time was the left carb.
What is going on? Anyone ever had this happen?
Car: 1976 kombi
Engine: 2 litre
Carbs: standard solex 34PDSIT
Fuel pump: electric
TIA for any advice!
Toby
[Edited on 18-3-2005 by type3lover]