I got heaps of type 4 engine stuff that is going to the tip. If you need anything, you better give me a yell pretty quick.
Was going to take them to Nationals but doesnt look like there will be enough room for everything.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
what do you have?
Jon
Anything you want.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
got a whole engine??
I'd be interested in any longblock stuff, cranks, rods, case, heads, hardware etc. Not at all possible to bring it to the nationals?
Jon
I have a few engines (possibly 3???) in pieces. So 3 cases, 1800 cranks, 2 litre cranks, 5 thousand pushrods, several sets of tinware etc. 2 litre cranks and rods will cost bucks. I would much rather you come down and have a pick through the stuff to see what you think is best. Apart from my big valve heads which I dont know quality of yet (that engine still assembled, has gritty metal in the bottom of it) all the heads I have are junk. Come down with a trailer and you can take it all. Actually I will give you an unregistered rusty trailer to take it all away with!
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
Its first in best dressed.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
could be interested mate just waiting on the old man to get back to me
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
definitely interested mate will be down early this weekend if thats good with you the old man said there may even be some beer involved for you
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
When r you chucking it, I want a 2l short block if ya got one still, a decent case and tinware if not.
Is saturday a public holiday? If not I will toss it all on saturday. That will leave everyone with a day off on friday to come and have a scrounge.
I dont have any engines in any state of assembly...except for a type 3 engine thats ready to go in a car for $350.
I've had a look at the cases and one was stuffed. So I have two good cases. I have many many sets of tinware. I'm certain there would be at least 3 good full sets.
1800 cranks I will give away. For the 2 litre I want $250 with a set of rods thrown in for free. Might have the odd type1 crank as well for free.
Alternators and starters I will let go for $30 each. I dont think I have a 2 litre starter.
I dont have any carbs at all, not even dead ones. Dont have stock dizzys, but the odd 009.
I may have found 1 usable head, but im not the best for picking these things. I cant see cracks and valves arent recessed.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
Che Castro wrote:I'd be interested in any longblock stuff, cranks, rods, case, heads, hardware etc. Not at all possible to bring it to the nationals?
When you say hardware, do you mean all nuts and bolts? I am about to strip an engine so I could keep the full set of nuts/bolts together. If you tell me exactly what you want, I guess I could try and squeeze it in for the nationals.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
PISSED OFF that i dont live a bit closer to this bit of action
Calling all NSW Mid North Coast Veedubbers
Click Below
you have u2u
Oh man why don't I live closer too?!
My number is 0423 189 679.
I'm available between these hours.
Tues (today) between 4 and 6:30 pm
Wed All day until 6pm
Thur & Friday between 10am and 2:30 pm then anytime after 4pm.
Saturday until 10:30 am.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
my old man has your number and will give you a call shortly
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
dibs on big heads
you have u2u
TIM
You only need two tools
Wd40 if it don't move and it should
Duct tape if it move's and it shouldn't
Apart from tinware, she's pretty much all gone. Barls snr has first claim on the rest which I will take to nationals. After that, it will be a free for all.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
thanks mate the old man is very impressed
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
Any carbs? a Pair with linkage?
no carbs, I had 6 or 8 and couldnt make 2 decent ones. They were bastardised with bits and pieces of all sorts of carbs melded together to form crud. Ended up part swapping them for a reco set from Dunham Autos.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
