subaru.freak Casual Dubber
45 posts · joined Mar 2005 ·
Has anyone done one yet? Pics anywhere?
ER27/EG33/EZ30 Conversions?
type2nut Officially Full-On Dubber
223 posts · joined Jan 2003 ·
Humpty in Perth is in the process of fitting an EG33 in to his T3 transporter.
Go to www.smallcar.com/forum and you will find the same model transporter with an EZ30 in it.
Go to the http://autos.groups.yahoo.com/group/subaruvanagon/ and you will find many EG33's and a couple od ER27's, in T3 vans.
Can't help if you're after beetle conversions.
[Edited on 25/3/2005 by type2nut]
Go to www.smallcar.com/forum and you will find the same model transporter with an EZ30 in it.
Go to the http://autos.groups.yahoo.com/group/subaruvanagon/ and you will find many EG33's and a couple od ER27's, in T3 vans.
Can't help if you're after beetle conversions.
[Edited on 25/3/2005 by type2nut]
humpty Bishop of Volkswagenism
3,336 posts · joined Sep 2002 ·
Here ya go....
I haven't got any resent pics of the conversion, but here's were I am at right now:
• Engine in
• Engine Mount fabbed
• Extra transaxle mounts fabbed
• Transaxle Nose mount upgraded
• Fuel system upgraded
• Porsche 911 twin inlet muffler box installed
• Coolant plumbing done
• Air intake and custom made box built in stock bus location on passenger side
To do:
• Install harness and charging system
• Mod accelerator cable and fab a suitable bracket
• Install O2 sensors and extend O2 harness
• Coolant overflow tank mounting
• Upgrade dash guages
• Upgrade brakes (after its on the road)
• Upgrade suspension (after its on the road)
And then try and make the bus look good!!!
http://www.aussieveedubbers.com/forum/viewthread.php?tid=4279#pid280063
I haven't got any resent pics of the conversion, but here's were I am at right now:
• Engine in
• Engine Mount fabbed
• Extra transaxle mounts fabbed
• Transaxle Nose mount upgraded
• Fuel system upgraded
• Porsche 911 twin inlet muffler box installed
• Coolant plumbing done
• Air intake and custom made box built in stock bus location on passenger side
To do:
• Install harness and charging system
• Mod accelerator cable and fab a suitable bracket
• Install O2 sensors and extend O2 harness
• Coolant overflow tank mounting
• Upgrade dash guages
• Upgrade brakes (after its on the road)
• Upgrade suspension (after its on the road)
And then try and make the bus look good!!!
http://www.aussieveedubbers.com/forum/viewthread.php?tid=4279#pid280063