just found this here:
http://www.pbase.com/slimboyfat/image/41525464
looks like it'd be a handful...
kai:duh
for those unsure what rat look is, click the link.
thats some pretty fair fake rust they have sprayed on there
Reimagined/Recycled/Upcycled Cool
red oxide goes a long way:P
thats one kick-arse motor:thumb
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFour
Thats not a bad idea for an intercooler :duh
was sort of wondering how to do something like that without resorting to a porsche whaletail decklid
68 Beetle - rebuilding 😵💫
65 beetle - driving 😎
:cry :cry :cry :cry :cry
ooooh how could they do that to that W...
:cry:cry:cry:cry:cry:cry:cry
fractal geometry; the inner most limits of mind altering abuse
Fantasy
http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels
www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
its ok h
it might just a fiberglass one (fingers crossed)
68 Beetle - rebuilding 😵💫
65 beetle - driving 😎
yeah handful of rat
Let me out, When I call my name
IGOR is ALIVE !!!! 😎
I tell ya, from an artistic perspective, that looks amazingly creative.
Sh1t bomb body, and the shiniest, crome and fresh running gear, mags and interior.
NICE CONTRADICTION, really works well.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
is that a radiator sitting on the back of it?
Must have a scooby doo engine or something. (Scooby doo = subaru, u get me drift)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
What the!
Rob...
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
U know, the thing on the back of the bug, where its horizontal (rather than vertical) with pipes and crap going to it.
(Looks a bit more of an actual running component than a rear spoiler, so my guess is that it is a radiator)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
sean68 wrote:Thats not a bad idea for an intercooler :duh
there's your answer
😉
kai
I agree, it dose look like a radiator.
Rob...
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
Looks great 🙂
Da Time For The Aircooled Revolution Is Upon US.
Brothers & Sisters Lets Hit The Streets, Roll As One. And Feel The Power Of The Aircooled Storm.
Could you place a radiator horizontal like that? (even on a buggy?)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
i would suggest not as to have a radiator work sucessfully you need it to flow hot water from one end to the other, sittin on its back like that would possible create poor water flow and also it is getting all the heat rising off the motor. Would be as efficient as a top mount intercooler on a subaru or starlet gt. Front mount much more efficient.......... then again, what do i know. I drive 2 naturally asparated cars to which one is not even water cooled.... :duh
thats my 2 cents worth. :thumb
As for fibreglass.. our luck, shes a fair dinkim metal one. DOH!
1958 Beetle, 1966 VW Beetle, 1996 Holden Statesman!
Its an obsesion for engines and fuel.... 😏
Just noticed the turbosmart sticker on the end of the intercooler tank, kinda gives it away, definate cooler as opposed to radiator.
1958 Beetle, 1966 VW Beetle, 1996 Holden Statesman!
Its an obsesion for engines and fuel.... 😏
Could you place a radiator horizontal like that? (even on a buggy?)
here's the rad. in my Kombi.
not exactly horizontal, and has a big thermo fan on the back.
Yea, thats gotta have some sorta motor in it allrite!
Thats a pretty cool pic. Never saw a radiator in that pose before. hmm, interesting.
Would it be legal to have a running part like a radiater sitting out of your car in the same position as the intercooler (that we worked out) on the rat?
You could easily burn yourself if u lean on it or have some stupid kid open it up when its hot.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
tooooo phat!
Tagedeezee Heezy
It's cool, but I don't like what they've done with the engine cover.
nice very nice.
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
but what about the plumbing hanging out
Let me out, When I call my name
IGOR is ALIVE !!!! 😎
I agree - it looks the biz, but I'd have liked to see a carbon fibre or fibreglass decklid cut instead of the original w.
Still they did make over half a million ovals I guess......