I am looking to get the rear axle nut off my spiltty anyone know where I can buy beg borrow or steal a 36mm socket and the matching large bar in the sydney area. or by online. thanks
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
repco mate is where i got mine there is one in st leonards
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
Hey, i have a 36mm nut removal tool, made by EMPI, uses 1/2' square bar and a hammer, $30 its new.
Andy
They laugh because You are different, You laugh because They are all the same.
check out
www.lowlight.com.au for low lights only..
Tradetools, look in the white/yellow pages.
They laugh because You are different, You laugh because They are all the same.
check out
www.lowlight.com.au for low lights only..
trade tools. glenfords, places like that.
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
Cheap at SupaCheap Auto
You can get a 16 piece set from Supercheap auto for $25 from memory. They also come in handy for removing the lock nut that holds the stearing wheel on the stearing columb as well.
yea I have one of the ones VolksFolks is talkin about
great things, got mine for $10 US when I imported some stuff.
I got my drums off when the tranny was off the car with the wheels able to spin freely, just whacked it with a mallet and they come undone piece of piss.
great tool.
.
Many thanks for all the replies, I will have too have a proper investiage. I don't have the 1/2 inch bar either which is a problem
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
16 piece set from supercheap includes the 1/2 inch bar and one other 1/2 inch reversable socket thingy I can't remember the name of.....
need coffee......
The club has one for use.... n i have one as well. Let me know
thanks dave I might have to give you a shout. they are 180 in super cheap. time for a re think, as I only want the 36mm and bar not a whole set
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
I have one as well you could borrow with bar I am in Bankstown
Keeping it real !
many thanks
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
i think my bar and socket cost under $50 form trade tools. worth the money after breaking so many 1/4 inch drives!!
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
Thats the sort of monies I was thinking of. I will have a look for trade tools then :-)
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
may not have them down south, mabye glenfords or similar palces
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
http://www.transquip.com.au
Thanks for all the help and offers bought on line from here in the end. Good price and service so far. Have to wait and see what the tools are like when they arrive.
Bought some axle stands too
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
No I spoke too soon, got probably the worse customer service, told me I was wrong and no help, cancelled my order and then put the phone down. All because he didn't know how to deal with a credit card. Anyone would have thought I was putting him out. Probably wanted to get back to his paper and tea. oh well
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
Repco West Ryde went in 9am, didn't have it but could get it in by 12.30. Went back 1pm got it. looks good quality. 90 bucks.
talk about hard work. thanks for all the offers of help
thumps up to REPCO
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
Pleased to here you got sorted, what did you end up getting!$90,bugger i could of got you a proper tool, 9 - 1 power torque you can undo with a 1/2 inch ratshit, i used to struggle and sweat not any more, its worth its weight i tell ya
anyway good luck man
also does the and clutch gland for 12/6 volt fltwheels
Andy
pic
[Edited on 28/4/2005 by VolksFolks]
They laugh because You are different, You laugh because They are all the same.
check out
www.lowlight.com.au for low lights only..
a 36mm socket and matching 3/4 inch sliding t handle bar.
I could have got the full set for 180 admittitly. But I didn't really want stuff that I don't need. I can get the 46mm etc when I need it. annoying thing is I have it in the UK not being used. couldn't bring everything. and I have a couple of scaffolding bars in my rented flat ;-)
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
