Skip to content
Aussieveedubbers

L Bug pics

1 like
Share Share on Facebook Share on X Share on Reddit

Buger Gary Seriously Crusin Dubber

159 posts · joined Aug 2002 ·

#36444
Hi all. I have finaly got a decent photo of my L Bug in it's finished form.Well probably not completely finished as I don't think you ever stop playing with them do you.I have done a lot of km since the rebuild and have ironed out most of the problems and it's running well.

Buger Gary Seriously Crusin Dubber

159 posts · joined Aug 2002 ·

#36446
I'll try again I hope this is small enough!

1 attachment · Log in to view

OvalGlen Custom Title Time!

1,361 posts · joined Aug 2002 ·

#36476
you could even go a touch bigger and I'd like to see it again as well.
Nice one !
Regards,Glenn>

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 ·

#36579
Hey Bugger

were you the one with the handling problems on the Super?

What was the problem?
Futue te ipsum!!!

Buger Gary Seriously Crusin Dubber

159 posts · joined Aug 2002 ·

#37043
Yes I was the one with the handeling probs. I have it handeling a fair bit better now,but it still needs some work. I ended up removing the strut brace for a try and found I had a completely new Bug.I installed it when I rebuilt it and never ever drove it without it and when I took it out I could feel the difference instantly. It still feels like it body rolls in the back and it is greasy in the wet, but a vast improvement.I am now thinking maybe a sway bar for the body roll and possibily look at the rear tyres? Has any one had anything to do with Champiro tyres? I'll try a larger pic for you simon, the first one I tried to post was49.8kb and it wouldn't acsept it. It's a pitty these computers arn't as simple to work as a VW!
Gary.

NigeType3 Officially Full-On Dubber

371 posts · joined Dec 2002 ·

#37194
Gary just wondering what size wheels & tyres your runing in the pic. rears look deeper than the fronts.
Cheers Nige

PS. Nice ride:thumb

Buger Gary Seriously Crusin Dubber

159 posts · joined Aug 2002 ·

#37210
how are you going Nige? The rear wheels are almost 6" wide.I had them made by a local wheel maker. He cuts two wheels in half as far as he can, one from the front and the other from the back. He then welds them together with one weld to make them legal.He then sand blasts them and gives them 3 coats of black and then one of silver and bakes them in an oven.I think it's good value for $100 per wheel. The only drawback is you need 4 extra wheels to do the whole car. The front ones will have to go in only as a L bug struts won't allow you to go out any wider.Also I ran out of funds and the front hasn't been done yet.
Gary.

Buger Gary Seriously Crusin Dubber

159 posts · joined Aug 2002 ·

#37211
Oh and the tyres are 195 x60 r 15