Now got a sporty re-built 1600 kombi box in the buggy project. With regards to gearing any tips on tyre sizes that can be comfortably used ?? Was thinking 31" but wondering if 33"or even 35" was possible ??
Cheers:beer
If it wasnt for physics & law enforcement I would be unstoppable....😁
what engine?
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Nice fresh 1776cc 👍
If it wasnt for physics & law enforcement I would be unstoppable....😁
i wouldnt bother going bigger than 31's u should get decent ratios with that. combo. plus the bigger u go the more attention u get from the boys in blue and i beleive 31's are the legal limit on a bug.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
wouldnt bigger also reduce top speed? I would be interested to know what kind of speed is achievable with each size?
Larger will theoretically increase top speed as it raises the final gearing (larger rolling diameter), if your engine can pull it or not is another matter.
What speed is achievable with each size is dependant on your transmission and diff gear ratios.
.
You shouldn't worry about top speed, (remember you can only go as fast as the speed limit), but more what tyre size and diff ratio work well together so it gives good acceleration but doesn't over-rev on the highway.
I also wouldn't go bigger than 31's.nn[ Edited on 20/9/2005 by Sandy ]
30,s or 31,s
no bigger
i,d go 30.5 9r,s
best bet is getting 2 30,s and 2 31.s second hand and try them both
before you buy new
just ask if you can borrow them
then shop around for the best price
you,d be amazed at how stupid they are and how much bullshit they feed you about cost
terry
anyone who says it's bad to put subaru motors in vw's.....
hasnt got a clue about smoooooooooth
terry
brisbane
0403252522
you know who i am