Quick P & C Question

Jeza Officially Full-On Dubber

353 posts · joined Jan 2003 · 23 Apr 2003, 5:51 pm

#40690

Hello all

My old 1600 TP gave up in the weekend, day before the NZ Nationals in fact... but I'll tell that story in another post.

So it's time to think seriously about a rebuild. Some one here has new Cofab pistons and cylinder kits really cheap- I'm sure I've read about them begin difficult to balance.

(errr... should that be "Cofap"?)

Anyone used them? Any feedback- good or bad

I'm looking at building a stock (or near) 1600 for a cheap and reliable engine while I sort the rest of the body etc out then I can turn my attention back that way, probably in a few years time 😀

Cheers
Jeremy

[Edited on 23-4-2003 by Jeza]

......random gibberish for today.......

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 23 Apr 2003, 6:02 pm

#40694

I dont think so.... your listening to the wrong end of the SHEEP

I'm sure I've read about them begin difficult to balance.

Why would they be difficult to Balance....
there only being weighed against one another ... and material removed from the heaviest one to reduce it weight to the lightest???

Which farmer told you this bull shit ????

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Jeza Officially Full-On Dubber

353 posts · joined Jan 2003 · 23 Apr 2003, 6:12 pm

#40700

mmmmm... thanks

From memory (which is pretty fried right now) I read it on shoptalkforums somewhere, ages ago. I think they were making reference to the difference between the heaviest and lightest pistons being large, so lots of material had to come off.

But if they're good then that would suit me, I was only just starting to get the bank balance back in order 🙂

cheers
Jeremy

......random gibberish for today.......

Che Castro ankle straps

1,945 posts · joined Aug 2002 · 23 Apr 2003, 6:47 pm

#40727

yeah i'm running cofap pistons, they are a brazilian subsidary of Mahle (german company). They were all of a similar weight so it was easy to balance. Cheap and they work.

Jon

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 24 Apr 2003, 8:22 am

#40932

If the balancing guy person knows what there doing, the psitons are weight seperatly without the piston pins.

Then the pins are weighed and the lightest pin is matched to the heavest piston and so on so less metal has to be removed.

Pretty simple method... and some balance people remove the weight from the pistion pin as this is made from steel and less would have to be removed to reduce the weight vs removal of alloy from the piston.

Removal of metal from the piston pin wont hurt as it floats in the piston anyway. Its a bit harder to remove the steel due to hardness, but its not impossible.

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Jeza Officially Full-On Dubber

353 posts · joined Jan 2003 · 25 Apr 2003, 8:34 am

#41163

Thanks guy's

Reco engine plans well under way.... all be it only a 1600

😀

Jeremy

70AutoStik Insano Dub Head

730 posts · joined Aug 2002 · 25 Apr 2003, 1:10 pm

#41203

Cofap is the generic name of the same "Cima/Mahle" P&Cs used by the factory. If you have a set of "Mahle" P&Cs you'll notice on the box they are also made in Brazil.

bajaman64 Casual Dubber

45 posts · joined Jan 2003 · 27 Apr 2003, 1:13 pm

#41718

The MAHLE warehouse is only down the road from work. I have been to scared to go in there, but now i have a reason. I will ask them about the branding and so on. Will post response.