Skip to content
Aussieveedubbers

Rear Wheel Bearing Replacement - easy????

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

56astro Custom Title Time!

1,772 posts · joined Aug 2002 ·

#423062
For a beetle IRS

I've read the bit on "Rob and Dave's" site and it seems pretty easy.

Are there any traps for young players, what sort of bearing kit should I get?

VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#423133
Hi

Price the bearings at a few places, they do vary between VW shops and bearing supply places. Get new seals as well and make sure you remember to remove the big circlip 1st.

Steve

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#423174
Yeah DONT 4 get the big circlip like i did the first time i replaced them.

Vintage has the kits available if you want
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

56astro Custom Title Time!

1,772 posts · joined Aug 2002 ·

#423430
OK fellas, 😂

I've re-read Rob and Dave's article and he doesn't mention a circlip. ❗

What'sgoing on

VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa

Che Castro ankle straps

1,945 posts · joined Aug 2002 ·

#423440
There is a big circlip that holds one of the bearings in - cant remember which one, but I do remember it was a bitch to get out because I had crappy circlip pliers. Other than that you'll need a mallet and a drift to get the bearings out and your usual tools. Not too hard.
Jon

56astro Custom Title Time!

1,772 posts · joined Aug 2002 ·

#423441
Phew

I though the 2 gurus were having a lend of me.

I'll give VVDS a ring cause I need some other stuff as well.

Thanks guys

VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa

Gracey Wolfsburg Wizard

511 posts · joined Feb 2003 ·

#423909
The big circlip holds the inner bearing in, and yeah it can be a bitch to get out. The first time I did it I was told to allow 2 hours per side. The first side took me a hell of a lot longer than that and the other side took less than 2 hours. Nothing like a bit of practice eh.
Have fun.

Andrew

56astro Custom Title Time!

1,772 posts · joined Aug 2002 ·

#423982
Thanks Andrew, I have the kits ordered and hopefully will have a chance over the weekend to change them.

VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#424369
Steve

The circlip is usually hidden with grease so clean all the old grease out of the housing first ... n tap gently with the FBH
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

56astro Custom Title Time!

1,772 posts · joined Aug 2002 ·

#425142
Well, I did it :beer

About 4.5 - 5 hours

nothing broken or lost (never even lost my temper)

Got to the point where I had to start tapping the stub axle out and him no come out, mmmm

me then remembers what them Veedubbers said, BLOODY CIRCLIP.

Only other little hiccup was on the first one I did. When I was re-assembling I had 1 too many small spacers. WTFIGOH :cussing

Turns out it was the inner race of the outside bearing set.

THANKS FOR THE TIPS MEN
:beer

VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa