DIY-DUB Custom Title Time!
1,591 posts · joined Apr 2004 ·
where does the thing go, is it obvious, and can it be taken out and put back with the box in the car or not?
reverse light switch on gearbox, quick answer needed
BUGBOY Moderator Chief Toy Dude / Head Cruiser
2,147 posts · joined Aug 2002 ·
It up near the nose cone of the box.toward the front of the car of the gear box.
It has wires attached to it.
It can also be taken out and replaced etc with out having to take out the box.
Easy job
It has wires attached to it.
It can also be taken out and replaced etc with out having to take out the box.
Easy job
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Find us on Facebook
Change over king and link spindles
6-12volt semaphores
Find us on Facebook
DIY-DUB Custom Title Time!
1,591 posts · joined Apr 2004 ·
i gotta figure out where the wires run 2 and from it 2, descriptions where they were supposed to go are greatly appreciated, cause the last owner or one b4 that cut the wires out and theres only afew sections not connected to anything left so i cant trace it anywhere:vader
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
they come off the coil as a powered wire - ie the +ve tab of the coil.
They then go to the switch on the box as described above.
They then comeback to the engine bay and go into one of those 1 to 2 connectors. This should be on the right hand side just in front of the shroud (front is front Mr Muir!)
From here it is one wire to each of the tail lights
They then go to the switch on the box as described above.
They then comeback to the engine bay and go into one of those 1 to 2 connectors. This should be on the right hand side just in front of the shroud (front is front Mr Muir!)
From here it is one wire to each of the tail lights
Futue te ipsum!!!
akean1 Remember To Love
1,088 posts · joined Dec 2004 ·
make sure you put an inline fuse between the coil and switch ( the closer to the coil the better)
DIY-DUB Custom Title Time!
1,591 posts · joined Apr 2004 ·
discovered why i couldnt find where it went, theres a big plug in the whole, needs a huge allen key type thing to undo, and that was filled with crud, so is all sweet now, thanks all for help