Skip to content
Aussieveedubbers

Installing engine lid spring.

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

53racer Seriously Crusin Dubber

148 posts · joined Jan 2006 ·

#457220
Can anyone tell me how the heck to do it with a 64 1200?

i can understand how a spring works, but cant figure how a loose metal piece connected to it can make it work..... :duh
DE-38-UG
1964 1200.
Beware the Wolfsburg.

Robo Compulsive Aussie Vee Dubber

4,491 posts · joined Feb 2003 ·

#457235
There shouldn't be anything loose. What do you mean.
Rob...
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft

53racer Seriously Crusin Dubber

148 posts · joined Jan 2006 ·

#457258
well, u have the spring which on one end goes to a finger point, and the other end goes to 2 open ends facing away from each other.
then there is a metal piece connected to those 2 arms thats loose.... i cant figure out how it fits in and still works.
ill see if i can get a pic


[ Edited on 17-2-2006 by 53racer ]
DE-38-UG
1964 1200.
Beware the Wolfsburg.

Robo Compulsive Aussie Vee Dubber

4,491 posts · joined Feb 2003 ·

#457296
Well on my 6 volt beetles the finger part goes into the notch in the bracket on the firewall, the coils of the spring are at the bottom, the ends facing away from each other sit into the bracket on the decklid. EG in the same position in this following picture.

1 attachment · Log in to view

Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft

53racer Seriously Crusin Dubber

148 posts · joined Jan 2006 ·

#457578
I discovered why I cant install mine and why there wasnt one when getting the car, the section where the spring goes isnt there, taking the decklid off helped, decided i'm gonna get the removable pins so i can take the lid off instead of lifting it.
DE-38-UG
1964 1200.
Beware the Wolfsburg.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#457718
You have to fit the spring loose to the boot lid first and have it off the car.

you need a mate to help you hold as well then fit the spring hoop end to the metal arm area on the car and push the engine lid down so you can fit the hinge screws simple

but if your missing the metal arm on the under side top of the engine compartment then you have trouble
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Purple Martin Fahrvergnugen

913 posts · joined Feb 2003 ·

#458164
The two spring ends facing away from each other that go into the lid: do they go in the pair of holes nearest the edge of the lid, or the other pair of holes away from the edge?

EDIT: Don't worrry, I found a pic... they go in the holes nearest the edge.

[ Edited on 21-2-06 by Purple Martin ]
1959 red & white Beetle
1975 Kombi camper