motor question

70 fastback Slammed & Awesome Dubber

79 posts · joined Feb 2004 · 27 Feb 2006, 7:52 pm

#459584

interested to know if anyone has purchased one of the mexican motors advertised on the back of VMA -supplied by mickmotors and others.
Are they anygood?
How much do they cost?
Any problems to look out for.

Also regarding 2litre motors into bettles(mine is a 70 model)
What would one expect to pay for a good motor plus all the conversion bits and pieces.
Want something reliable but a bit more power than my tired 1600 which is in at the moment.
Appreciate any info

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 27 Feb 2006, 8:47 pm

#459604

When you say 2L do you mean kombi Type 4 in a beetle?? or do you mean a bored out 1600 Type 1?

My motor is a 1916 (94 barrels in a standard 1600)

Everything is stock except for a mild cam.
Stock carb etc

Gives 25% more power than stock.
Nice simple set up that has reasonible poke for not much more than a standard rebuild.

How much - some where from $1500 for a 2nd hand 1776 long block to $8k plus for a drive in drive out Pobjoy special

The "new" motors would be ok but dont expect any power gains out of them.
They come with a cast crank and i "think" flywheel which may limit there usefullness in some eyes

Hope this is a starting point for ya

Futue te ipsum!!!

mackaymanx Custom Title Time!

1,611 posts · joined Jan 2006 · 1 Mar 2006, 9:21 am

#459989

Does anybody else have an opinion on the Mexican motors 'cause I interest in this too.

Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."

[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]

MickH Hairy Gutted Sloth

3,389 posts · joined Sep 2003 · 1 Mar 2006, 9:37 am

#459993

mackaymanx wrote:Does anybody else have an opinion on the Mexican motors 'cause I interest in this too.

Nothing wrong with them.I bought one 2 years ago and installed it into a bug(not mine) used as a daily.Was A LOT cheaper than getting a rebuild and it was all NEW. It still works fine,well it was last week:bounce As for a price....ring them and ask for yourself:thumb

tssnq.com.au

Fred Bloggs Commited Dubber

65 posts · joined Nov 2005 · 1 Mar 2006, 9:57 am

#459999

Give em a call
Then you will know the exact price and not a guess??
It will cost a fair bit to fit a 2 liter I presume you mean type 4, into a beetle as you have to convert the tinware to an upright, I think Sherman kits are about ( and this is a guess as the last time I got a price was 5 years ago) is about $650. Then you have to pay for the motor which could cost anything up to a couple of grand for a good one or even about 4 grand for a recon one??
You might find one cheap but you would not know the condition and it might last years or minutes???
Then you need to cut the body a bit for it to fit as it is wider, also type 4 motors are a bit more expensive to repair, ect.
I would recommend a nice 1916 or 1776, as mentioned above, a lot cheaper and as fast.

Fred

mackaymanx Custom Title Time!

1,611 posts · joined Jan 2006 · 1 Mar 2006, 11:48 am

#460031

I've already inquired about the price, it's about $2300 + freight(I presume) . I'd have to add on another couple hundred for full flow and sand seal kits. Would want to go full flow, I think it's the best improvement you can make to extend the life of the standard type 1 motor

Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."

[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 1 Mar 2006, 2:05 pm

#460065

Considering you get new
*case
*heads
*P&Cs

For that money its good value

I assume its all std/std

Futue te ipsum!!!