I have a few parts for sale
all parts are from a late 71 fasty
1x bonnet small patch of rust at front nothing major $20
1x full set of seats reasonable condition $35
1x set front lights, indicators and tail lights crazing on tail light average condition overall $20
2 gauges, speedo, and other dial, has slight surface rust on chrome rings but not major $35
cardboard insert for glove box bonnet release cable and glove box door $5
all parts are located in woonona post code 2517
I would prefer pick up but i may concider posting some of the smaller parts
call 0417 691 069 and ask for Keith
ill put some pics up later
or email me for some pics it may be quicker
[ Edited on 14-3-2006 by Critcher ]
[ Edited on 24-3-2006 by Critcher ]
[ Edited on 24-3-2006 by Critcher ]
To err is human, To really foul things up requires computers.
"I have a few parts for sale all parts are from a 71 fasty" at the top of his add so it's late type.
what are the headlight reflectors like?
They could do with a clean but no major dints or scratches that i have noticed
To err is human, To really foul things up requires computers.
I'm after a set of seats for my '70 fasty. Are they the original seats or newer ones made to fit? Greg
they are orginal seats
and here is a pic
of the set
and some more pic's
[ Edited on 5-3-2006 by Critcher ]
[ Edited on 5-3-2006 by Critcher ]
[ Edited on 5-3-2006 by Critcher ]
[ Edited on 24-3-2006 by Critcher ]
To err is human, To really foul things up requires computers.
got some pic's of parts up, my appologies to dial up users (uploading them with dial up was anoying as well)
To err is human, To really foul things up requires computers.
Just got back from Woonona with my haul.
Thanks for the great parts and great deal, Critcher:thumb
Keep an eye out for the seat pics, type 3 owners.
There's some good lowbacks in the pile!
Wish they were around when I needed some last year..
They're hard to find in a hurry.
The coast road's a great cruise, too!
Get those pics up, mate!
:P:P:P
bog'n'grumble
got the angle on the speedo just right so you can't see it properly, but it looks fine
[ Edited on 13-3-2006 by Critcher ]
[ Edited on 14-3-2006 by Critcher ]
To err is human, To really foul things up requires computers.
bump
need to move some of this stuff soon or it will end up at a wreckers or a bin
To err is human, To really foul things up requires computers.
bump
To err is human, To really foul things up requires computers.
do you know if the steering column could be used in a 66 type 3?
that is a good Question
Ive got no idea to the answer, maybe someone better versed in type 3 parts can help us
To err is human, To really foul things up requires computers.
I know it's different from 60's - 70's are collapsable - don't know if it fits though. post a pic. David
Have a look at the spacing of the mounting plate on the later one. The early (up to 1968) was the narrow mount where the holes are 50 mm apart. The 69-71 model has a slightly different mount which may not fit. Maybe someone could measure the indent under the dash and the hole spacing for you to compare.
[ Edited on 16/3/2006 by 1500S ]
Also have a set of 5 standard rims $30
a bit of surface rust and the tires are useless
To err is human, To really foul things up requires computers.
any chrome trim...especially the sill chrome
cheers
Sorry ive only got 2 bits off the dash
To err is human, To really foul things up requires computers.
is it possible to just change the shaft? to include the collapsable bit in the earlier car?
bump
To err is human, To really foul things up requires computers.
