Anyone got any photos/descriptions of the best way to create a removable rear clip/valance for a beetle?
:kiss
Kafer Lover Officially Full-On Dubber
370 posts · joined Aug 2002 ·
Removable rear clip
ctefeh Wolfsburg Wizard
479 posts · joined Apr 2005 ·
Hi,
Dasdubber in "members rides" showed a fair bit of his conversion(in steel) and I've seen 68Autobug's yahoo page on his (fibreglass).
I'm looking at doing the same in a couple of months, just working out options as well.
Enjoy
Ctefeh
Dasdubber in "members rides" showed a fair bit of his conversion(in steel) and I've seen 68Autobug's yahoo page on his (fibreglass).
I'm looking at doing the same in a couple of months, just working out options as well.
Enjoy
Ctefeh
vwrallycar Insano Dub Head
721 posts · joined Sep 2002 ·
i started with a new panel and just bolted it from the sides instead of spot welding it
Dasdubber DAS Resto Haus
5,746 posts · joined Aug 2002 ·
Howdy - take a look at this link - will be easier than sifting through the post in the members ride section:
http://www.manxgallery.org/gallery/album146
OR alternatively hold off until the next issue of VWMA - there will be a mini-technical article covering this process. 😵💫
Here it is removed;
[ Edited on 7-3-2006 by Dasdubber ]
http://www.manxgallery.org/gallery/album146
OR alternatively hold off until the next issue of VWMA - there will be a mini-technical article covering this process. 😵💫
Here it is removed;
[ Edited on 7-3-2006 by Dasdubber ]
Kafer Lover Officially Full-On Dubber
370 posts · joined Aug 2002 ·
Cheers heaps, thats just the ticket.
Just bought the latest VWMA today, so I guess the next ones a little ways off, and the car should be going to the panel beater next week.
Wanted to give the guy a bit of help, as though he's done vw restos before, he hasn't done a removable clip.
Fantastic job Dasdubber, I thought I had seen it in those many pages, but knew it would take a while for me to find.
Much appreciated and keep up the good work.
Tim
Just bought the latest VWMA today, so I guess the next ones a little ways off, and the car should be going to the panel beater next week.
Wanted to give the guy a bit of help, as though he's done vw restos before, he hasn't done a removable clip.
Fantastic job Dasdubber, I thought I had seen it in those many pages, but knew it would take a while for me to find.
Much appreciated and keep up the good work.
Tim
1303Steve Scirocco Rare
8,650 posts · joined Aug 2002 ·
Hi
Just about every one I have seen the left a lot to be desired. They left the back end of the car very flimsy, grab hold of the bumper on these cars and watch the beaver and mudguards flex or watch them gas it up of the line and see it shimmy, it also makes the use of rear tramp bar useless as the more you tighten it up the more the body will bend.
If you don’t really need it, don’t do it.
I’m putting one on my 1303 and I hope I can make better job of it, it’s a necessity on a WRX conversion.
Steve
Just about every one I have seen the left a lot to be desired. They left the back end of the car very flimsy, grab hold of the bumper on these cars and watch the beaver and mudguards flex or watch them gas it up of the line and see it shimmy, it also makes the use of rear tramp bar useless as the more you tighten it up the more the body will bend.
If you don’t really need it, don’t do it.
I’m putting one on my 1303 and I hope I can make better job of it, it’s a necessity on a WRX conversion.
Steve
Menangler Custom Title Time!
1,991 posts · joined Aug 2002 ·
Steve's right.
I had the flexing problem with my on my old Oval,
I welded the clip back on and the rear was solid again.
It's not that hard to jack the car up to drop the engine out the bottom.
I had the flexing problem with my on my old Oval,
I welded the clip back on and the rear was solid again.
It's not that hard to jack the car up to drop the engine out the bottom.
FAHRVERGNUGEN;
Description of a pleasurable sensation,
Experienced when a car and it's driver are in mutual harmony, A unique driving experience, Pleasure, Satisfaction,
A feeling experienced by Volkswagen Drivers.
Description of a pleasurable sensation,
Experienced when a car and it's driver are in mutual harmony, A unique driving experience, Pleasure, Satisfaction,
A feeling experienced by Volkswagen Drivers.
Dasdubber DAS Resto Haus
5,746 posts · joined Aug 2002 ·
Hmmm....I don't get flex at all with mine. I think without any support brackets (which the guard bolts attach to), there would be too much movement. In the original VW Trends article which I followed, there was a steel tube welded between the two support brackets to further stiffen the rear, however I didn't need to do this as mine turned out quite stable.
:jesus
:jesus