Skip to content
Aussieveedubbers

Sandblasting and hub cap clips.

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

53racer Seriously Crusin Dubber

148 posts · joined Jan 2006 ·

#466230
Hey, just got my new rims and there going to be sandblasted, the existing clips that hold the hub caps on have broken off and i need to get some new ones on.

my existing ones on the smaller wheels appear to be welded on, dont quite understand, but the ones on the wide rims appear to be screwed in, however the screws have no thread head anymore.

so........... what do i do, i know where i can buy new ones, but how do they get installed.

let alone the existing ones removed.

TY
DE-38-UG
1964 1200.
Beware the Wolfsburg.

lugnuts Custom Title Time!

1,070 posts · joined Aug 2002 ·

#466357
There riveted on,you can buy new clips and rivets,u drill or punch the old ones out,and install the new ones with a ball pein hammer and support on the other side,OR SO IVE HEARD 😵‍💫
Dont listen to what they say,just watch what they do.Oh yeah ive NEVER finished anything ive started.:o

Desert Moose Cut Cut Cut

2,098 posts · joined Mar 2004 ·

#466359
lugnuts wrote:There riveted on,you can buy new clips and rivets,u drill or punch the old ones out,and install the new ones with a ball pein hammer and support on the other side,OR SO IVE HEARD 😵‍💫
Yep.....just like that :thumb

I would just like to say do it before you paint...if thats not obvious

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#466367
New clips and instalation are available from Vintage at Campsie give them a call on 9789-1777, the cllips are rivited onto the wheel
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

geodon Wolfsburg Wizard

478 posts · joined Aug 2002 ·

#466397
Hub cap clips r readily available but not real easy to install as u have to support one end of the rivet while you peen the other end with a not insubstantial (ie big) hammer.
It may be heresy to most but I put my clips on with big pop rivets with the "nice"flat end on the drum side of the rim & the daggy end on the hub cap side. Just tickle up the nice end with ur angle grinder to make sure its flush with the rim. There is a small recess to allow for the orig rivet anyway.

[ Edited on 20-3-2006 by geodon ]

53racer Seriously Crusin Dubber

148 posts · joined Jan 2006 ·

#466569
TY all, i know what my saturday will be like now.
DE-38-UG
1964 1200.
Beware the Wolfsburg.