hi guys,
whilst on my way to work this morning, at the lights went to put it into first, pushed on the clutch and heard the worst noise ive ever heard evertime i change gear it sounds like a scraping and crunching mess of bits.
this is bad. i know this is bad. and im stuck at work right now,
was looking forward to going to the bbq tonight. god damit. anyone out there know what is going on with this please help.:cry
sounds like thrust bearing unseated/stuffed, its clips come loose/broken or maybe the tangs it sits on on the throwout arms one or both snapped.
its a motor out thing but shoulsdnt be too expensive.
crawl underneath and make sure bowden tube has a good bend, cable is OK and external arm is good. iff all these are fine, i bet you'll see the prob as soon as the engine is free of the transaxle.
PS. its times like that i am happy i have a buggy - taking the motor out really is only a 15min job.
:thumb
so thats it, im walking home and not going to the vw bbq.
thank you very much V.W GOD:cry
You can drive without the clutch
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied
does it do it without touching the clutch pedal?
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied
hi mate,
no its fine until i touch the clutch to change gear.
any suggestions?
you can drive without the clutch but you need to synchronise gear changes and revs, a blip on the throttle helps slide the change through.
having to come to a stop and then restarting can be tiresome- starting on the starter motor .. but it can be done....
:thumb
a few years ago when i was a aircon/fridgy mechanic i was on my way to a job that was 150km away just as i left, the work truck i had blew a seal in the clutch slave cylinder and i had to drive there and back nearly 300km with no clutch
u become a master once u get the hang of getting the revs right like helterskelter400 said stopping and starting all the time does get a bit much
Joel
i don't think i will be able to do it.
too many trafic lights and other cars on my way home, wouldn't want to cause more damage to my car or cause a pileup for others.
oh well, thanks alot guys, i let you know how i go with it.
Yes, sounds like the early clutch throw out bearing,
has come loose as someone else pointed out......
If its the solid type, may have just worn out......
Best of luck
Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
can i fix this myself our will i have to take it somewhere?
any idea of the cost to fix this?, it is the clutch throwout bearing.
if you can take the motor out yourself/with mates, you can fix it.
removing the motor is the most technical bit.
:thumb
if you have a normal early beetle, its 16-24 you should be looking for.
16 is what the clutch cable acts on and 24 is the thrust bearing. your probs are likley to be thrust bearing or the clips 23 or the hooks on tha actuating shaft 22.
:thumb
nice thanks mate👍
now i just need to get the parts,
maybe i can pick them up tomorrow @ the jambo
thanks again helterskelter
rip motor out and see exactly what you need first before ordering....
:thumb
