HI All...
Been off the Forum for a While.. Good to be Back...
I would like to put an Oil Cooler on my SUBARU EA81 powered manx Buggy...
I am wondering on the best way to feed the cooler core..?
I have seen plates that go between the filter and engine block, Do these work...? Where can I get one, sounds like the EASY option...
Any Help welcome...
Thanks...
Dean.
I use a screw on adapter block on the engine were the original oil filter sits and pipe to a remote oil filter and cooler. (you can have an adapter that still uses the original filter and position but has a point for oil out to the cooler and return) My oil lines also have a temperature operated switching valve that opens to the cooler when a preset oil temperature is reached. I got all the parts from motorsport connections here in Sydney but there are quite a few places that stock this sort of stuff. The Subaru has a smaller size adapter so just make sure it's for your model.
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
