Skip to content
Aussieveedubbers

EJ20 Throttle Body 180° Bend

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

ElusiveStranger Officially Full-On Dubber

330 posts · joined May 2006 ·

#498018
Hi Guys,

Great site! 😀
Been lurking for a while.

Hellbus (or others) In your conversion you have a 180º bend between the inlet manifold and the throttle body.
Did you make this or buy? Please could you give details of either.

71EJVan, awesome stuff also.

Keep up the good work guys. You're inspiration.

Steve - from across the pond in Blighty

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#498020
look up custom off road comes and goes above your post
Looking for that special lady : PM me for coffee & cake

71EJVan Officially Full-On Dubber

352 posts · joined Aug 2005 ·

#498139
You could make one using mandrel bent tube and 1/4 plate but I doubt you would save much by the time you welded it, surfaced the flanges and supplied gaskets.

Brendan
A VW for everyone!!

1972 1302 German Look
1971 Bay Panel with Subaru EJ20T
1970 Type 3 squareback in progress
1971 Type 3 notchback in progress

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#498151
Hi

What about reversing you intake manifold? Also rather than do a 180, what about a 90 so the TB is pointing straight up.

Steve

mackaymanx Custom Title Time!

1,611 posts · joined Jan 2006 ·

#498201
You can buy the toroid section used to make the adaper at most exhaust shops. If your fabrcation skills are ok, you could make one yourself, as 71EJVan said.

www.hrpworld.com/client_images/files/39_69.pdf

[ Edited on 8-6-2006 by mackaymanx ]
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."

[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]

mackaymanx Custom Title Time!

1,611 posts · joined Jan 2006 ·

#498266
True the COR units are good, but some people just like to do things themselves if they can.1303Steve was asking about pointing his straight up which would require special fabrication
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."

[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]

ElusiveStranger Officially Full-On Dubber

330 posts · joined May 2006 ·

#498320
Thanks for the replies guys 🙂

I saw it on one of your photos and thought "that'll save loadsa grief" ie won't have to make up a new alternator bracket, extend wiring etc.

I'm in the UK so buying one over there and getting it shipped might not be reasonable cost wise.

You guys do some fantastic stuff - Keep it up :thumb

There's a UK site www.vwkd.co.uk where there's a few of us UK guys on there ie RichBaker, RJES, Ricolla etc

I have a 2 litre Scooby Imp Sport lump waiting to have a new home sitting in my garage 😀

Helbus - love your throttle mod. I used to have the Type 4 2 litre. Valve guide snapped and goosed the head, other head had a receeding valve seat. Almost as cheap to do a conversion - bigger smiles though

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#498460
Hi

No need to reinvent the wheel, but you can always improve on a wheel. The COR one looks a bit thugly and sits very high. My point about turning it only 90 degrees is that it would keep its profile much lower.

I made the exhaust for my turbo WBX it was no big deal, just went down the road and bought some mandrel bends or a exhaust donut and got the local profile cutting guy to make the flanges and a bit of cutting and welding and I was done.

Steve

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#498466
I think I have one subaru to vw adapter plate & fly wheel left out of the run .I need to check when the sun comes up .
Looking for that special lady : PM me for coffee & cake

boof2332 Custom Title Time!

1,210 posts · joined May 2004 ·

#498486
Seagull, I need an adaptor and flywheel. If they are finished, buzz me and pop it in the post.

Matt

GeorgeL Officially Full-On Dubber

231 posts · joined Feb 2006 ·

#498519
1303Steve wrote:Hi

What about reversing you intake manifold? Also rather than do a 180, what about a 90 so the TB is pointing straight up.

Steve
Reversing the manifold has been done, but it also involves relocating the alternator and making a longer throttle cable.

Since, in a kombi, you have a lot of space above the engine, that seems to be a good place for the filter. Reversing the manifold might have the filter hanging behind the rear of the engine.

I also like the convenient and elegant throttle cable hookup in Helbus. Very clean, that.

90 degree bend? Might be good, but be careful that you have clearance between the filter and the firewall. Also keep in mind that the engine moves about a bit in operation, so you want a generous amount of clearance between the engine and accessories and the bodywork.

George