Skip to content
Aussieveedubbers

Rear torsion bars

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

kafer70

Former member ·

#50292
Just heading down to the shed to adjust rear torsion bars one lower than the other. I think karmannghia60 posted a chart with splines vs mm lowered
I found it but it won't load does any body have it. Will save the trial and erroe factor

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#50342
wasting your time unless you fit new torsion arm bushes as well.
both inner and outers with some nice moly grease to lubricate them.

both rubber and neoprene are available.
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

kafer70

Former member ·

#50410
well it was a good afternoon now have the beetle sitting square on all four wheels after adjusting torsion bar , adjusted my blinker switch so high beam worked and my fingers fit between steering wheel and lever(shallow dish sport steering wheel wood grain of course) and fixed my deck lid what a way to spend an afternoon. Fantastic.😀