Was great, 2nd time i have eva been there in my whole life, 1st time was bout 7 yrs ago or so... Still a fairly busy place, was great...
Saw supa-x gf and unlucky... i think it was called.
Would have luved if it was the dub night though, but regardless, ANY who hasn't been to the drive in MUST make a time to go, was seriously a walk back in time, and not just because the 50s music being played over the speakers while we waited for it to go...
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Got the baja finished already Chris? 😁
Custom doesn't come in a Box
PHHH! No.. been wanting too. no free time since i gone back to uni... only cleaned out hte crap in it today, and rolled it slightly down the hill as to not get a flat spot... THe body is slowly rusting more and more as it just sits out there...
the only progress i have got is having the engine in, and the starter motor turning it. (Now have a flat battery though). At the moment, trying to work out y no fuel is coming out of the fuel line. Quarter tank still left, and the end has been plugged... was pouring everywhere few weeks ago when i fitted the line the 1st time, (then i had ot un-fit it, plug it again, then take the engine out again, and refit that)
🙅 Really, its going no where too quickly. been almost 6 months since i had it, haven't really gotten anywhere at all. Just achieved alot of many other things that have no assistance at all towards the project... and its from mucking around with stupid things...
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Let me know if you need help in any way. :thumb
Mine is coming along. Just need to do brakes, and paint the doors, but I need about $500 for new brakes!
Custom doesn't come in a Box
Cheers mate, would be kool :P When i turn 18 on the 13th, will have to buy a couple of cartons and advertise a get together at my place and see how much a team of say 5 to 10 can do in a day 😀 HAHA!
would be kool
$500:o!!
Ouch.. what u going for? disk brake conversion kit or something? or some supa coloured gigantic set of calipers?
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Sounds like a plan! :thumb
Nah, nothing over the top, just brand new everything. don't wanna skimp out when it comes to brakes. I'd like to have some control on 90 degree descents. hehe
Only upgrade I'm planning is a dual circuit master cylinder, out of a late model bug.
Custom doesn't come in a Box
Good move!
Lol, i'm living off 2nd hand everything!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
