Skip to content
Aussieveedubbers

Just bought a house, Need to replace the garage doors.

0 likes
Share Share on Facebook Share on X Share on Reddit

buzzbug Praise the lowered

1,992 posts · joined Mar 2003 ·

#527602
Ok as the titled says i have bought a house and need to replace the garage doors.

They are you run of the mill rollar doors.
I was wanting to know if anyone knows how much a single rollar door costs?

I need to replace both of them and want to know if it will break the bank to replace them.

Here is a pic so you all have something to look at.

Lee.

1 attachment · Log in to view

some people are like slinky's
they have no useful purpose
but they are fun to watch
when you push them down the stairs

david777 Officially Full-On Dubber

307 posts · joined Mar 2005 ·

#527656
I've seen 'seconds' or used ones for sale from around $300, new ones start from around $700.
Plus installation.
If you are handy with a spanner, and the existing tracks are in reasonable condition, you may be able to do it yourself.
Check you local paper for some local retailers and installers.

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#527657
Shop around the local door dealers, they usualy have "shop soiled" doors real cheap. you will need to know the "opening size" before you go shopiong though. Measure the height from the floor to the top of the opening and then the width of the opening, you will also need to tell them what you are fixing to, brick,timber, then they will know what to provide as far as screw / bolts go. One last thing is they are not hard to fit, give it a go, if in doubt u2u me.
I dream of a day when a chicken can cross a road without being asked for it's motive!

buzzbug Praise the lowered

1,992 posts · joined Mar 2003 ·

#527662
Fellas thanks for your help.
I will keep an eye out in the paper and have a look around the local dealers.

Lee.
some people are like slinky's
they have no useful purpose
but they are fun to watch
when you push them down the stairs

sinecure Want another... :(

1,031 posts · joined Mar 2006 ·

#527719
If you intend to remove them yourself, when they are in the up, rolled position, put a large number of layers of duct tape around it at several locations before you undo the shaft bolts from the retainers.

The springs that actuate the weight reduction are under extreme tension, and will do you a nasty injury if they let go.

Be very careful.
A POSSE AD ESSE.

I live in my own little world, but it's okay, they know me here.

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#527721
Congrats on buying the house Lee :thumb
Futue te ipsum!!!

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 ·

#527823
What is wrong with the ones that are there?

If you replace them, get the auto bit, it is magic!
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied

buzzbug Praise the lowered

1,992 posts · joined Mar 2003 ·

#527848
koolkarmakombi wrote:What is wrong with the ones that are there?

If you replace them, get the auto bit, it is magic!
Was just quoted $2200 for run of the mill doors with automatic openers.

Or roughly $700 by them selves. (installed with the old one removed and disposed of)


Cheers Barry.

Lee.
some people are like slinky's
they have no useful purpose
but they are fun to watch
when you push them down the stairs

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#527934
700's not a bad price but the 2200 is a bit steep, keep try'n, koolkarmakombi is spot on, go the auto.
I dream of a day when a chicken can cross a road without being asked for it's motive!

penguin ackkkkkk thhhhhpt!

3,383 posts · joined Aug 2002 ·

#527978
Lee
1st, Congrats on the house, guess that means you must be posted soon 😉
2nd, why the replacement option? whats the brand of door? can you retro a motor drive to them to make it easier to open etc? or are the doors screwed?
'Ah, whatever................'

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#527985
I had a 6.5m wide B&D electric door fitted for $1800 (Quotes ranged $1800 up to $5500 for the same door)
Shop around !!!!!


MickH Hairy Gutted Sloth

3,389 posts · joined Sep 2003 ·

#528002
buzzbug wrote:
koolkarmakombi wrote:What is wrong with the ones that are there?

If you replace them, get the auto bit, it is magic!
Was just quoted $2200 for run of the mill doors with automatic openers.

Or roughly $700 by them selves. (installed with the old one removed and disposed of)


Cheers Barry.

Lee.
Automatic openers are only $300-$380 and are a piece of piss to instal.The ones i bought even came with an installation video and 2 remotes!!!
tssnq.com.au

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#528118
Best way to remove existing is to tape / tie up the curtain when all the way up then, while holding the roll from moving, remove the tracks and let the roll turn around (keep it under controll) till the tension is off the spring, don't bother using the old tracks the new doors will come with new ones,
I dream of a day when a chicken can cross a road without being asked for it's motive!

amazeer Bishop of Volkswagenism

3,029 posts · joined Nov 2005 ·

#528160
Just got a call from the architect that my house plans are 98% done. Saturday will be the last chance to make any changes. 6 x 9m workshop area with 12' ceiling height + regular 6.7 x 6.5 double garage attached. 5.5 x 7m home cinema room, 7x6m snooker room with bar. The rest of the house belongs to the wife and I couldnt care less. All figures that will no doubt totally impress starbug. I havent yet worked out how I am going to pay for it, but that is secondary to requirements.

What I need is for someone to tell me how to use a 36horse to operate the garage door. Now that would be cool.

[ Edited on 30-8-2006 by amazeer ]

buzzbug Praise the lowered

1,992 posts · joined Mar 2003 ·

#528262
penguin wrote:Lee
1st, Congrats on the house, guess that means you must be posted soon 😉
2nd, why the replacement option? whats the brand of door? can you retro a motor drive to them to make it easier to open etc? or are the doors screwed?
Funny you say that mate,
I take up my posting at RAAF Richmond on January 15th next year.

God bless the Military

And the door are screwed, no locks and rough as guts both in operation and looks.

Lee.

[ Edited on 30-8-06 by buzzbug ]
some people are like slinky's
they have no useful purpose
but they are fun to watch
when you push them down the stairs

penguin ackkkkkk thhhhhpt!

3,383 posts · joined Aug 2002 ·

#528324
Lol,
I figured the gods of DP-AF (or whatever the green version is) would do that. BTW, anyone told you guys yet that we're pulling a lot of folk out of there next year?
'Ah, whatever................'

buzzbug Praise the lowered

1,992 posts · joined Mar 2003 ·

#528521
penguin wrote:Lol,
I figured the gods of DP-AF (or whatever the green version is) would do that. BTW, anyone told you guys yet that we're pulling a lot of folk out of there next year?
I know that there has been alot of talk about it over the years.

I also know that there has been alot of building going on around amberley too.

Hopefully they might move us up there at some point of time.

Lee.
some people are like slinky's
they have no useful purpose
but they are fun to watch
when you push them down the stairs