hey
looking at buying this buggy and does anyone know if you can still rego shortened pan buggys in nsw? there seems to be no papers saying it was previously regoed
cheers deon
🙂
Hi sgetty, you need to talk directly to the RTA, and even visit the engineers in person and ask them (take a picture of the car).
I went through this last year when getting a SWB buggy rego'd in the ACT, go straight to the people who have to check the car over. If there is no evidence of previous rego as a buggy, and no paperwork, then you will probably need to get an engineer to certify the car. This could mean $$.
But the RTA will tell you all of this, go and talk to them and get the right info from them first time.
Persevere though, I had the runaround for quite a while last year before finally getting my buggy rego'd. Good luck!
start calling certifying engineers right now, and praying. there were a bunch of SWB cars ok'ed a few years back, but then some anal retentives took a disliking to SWB buggies again and it's been difficult ever since. there are a few engineers out there willing to do it, but finding them could be hard.
Makes me kind of cranky given some of the hotrods people are allowed to register in NSW, don't even get me started on custom harleys...😠
I'm with u pete, us young ones miss out.
Unless we end up being spoilt brats who can afford $10k upfront... but not many can...
anyway one can petition this to change the rule? like u said, others get to custom make this and that... where is the equality... i would feel more safe in a shonty swb then a 100% perfect working harley anyday... (but thats just bike novice me)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
they are changing the rules Chris all the states the same .:cussing
malcolm, like I said in your post, I think you'll find your car will be easily registered if you work with the engineers (lik I did). SWB buggies are a different animal completely, and NSW has a history of disliking them.
sounds like a hell of a burnt hole in the pocket...
what would have been the total $ spent getting ur swb done Uncle Pete? Wouldn't be cheap 🙁 (i would imagine, with the engineers and all)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Engineering cost $700 total. I spent an hour with the engineer before I even touched the car finding out what I could and couldn't do. That cost $100. Then each time I was goign to do something, I rang him and got permission. He checked it a few times during construction and the final certificate cost $600.
If you do it right it's cheaper and easier. I know of people who've spent thousands on engineers coz they called them in at the last minute. That's without even mentioning all the changes theor cars needed.
but cause an swb is classed as an ICV, u gotta include a engine conversion in the budget, wouldn't ya?
or is it possible to make a quiet, emmission acceptable catalytic exhaust for a type 1 vw motor? say if u even fitted an ECU to manage the whole caboodle
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
then go LWB and get some stability into the bargain. Aside of nostaligia, there is no real advantage to SWB. They understeer more and pull uncontrollable wheelstands at the drags. Most of them were built with appalling floor pans, and there is no room in them. Even Bruce Meyers went LWB with the manxter. What does that tell you?
to go lwb :thumb 😀
Cheers Pete
[ Edited on 10/9/2006 by bajachris88 ]
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
thanks guys
i havnt checked this thread for a wial
the buggy was a scam anyway but looking to the future i will prob go lwb buggy or maby baja too many roads and forest to explore not too.
deon
🙂
yes but id have to change that cage and that kit, not a fan of bug eyes and bris is a hike would do it for the right one though
🙂
