WTB- solex 34 Pict 3 Carby

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 25 Sep 2006, 5:55 pm

#537872

As the subject says after a carby for my daughters 72 super. Went to put a kit through on the weekend and found the volume adjustment screw broken off and unable to get it out. So I was hoping someone might have a spare one lying around that they might want to sell. (in reasonable condition)

Thanks Allan

[ Edited on 25-9-2006 by CHADMYSTER ]

beerdoc Insano Dub Head

838 posts · joined Jul 2004 · 25 Sep 2006, 6:40 pm

#537889

If you cant get one closer I have one that I know works and yes in reasonable condition

$120 Plus Freight

Cheers Doc

reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 25 Sep 2006, 7:51 pm

#537914

Thanks Doc, I'll let it run for a while and see how it goes. Thanks for the reply

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 25 Sep 2006, 9:58 pm

#537973

bump

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 26 Sep 2006, 7:12 am

#538070

bump

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 26 Sep 2006, 7:19 am

#538071

Give Ben Durie a call hes up yr way at TERALBA 4950-8248 he may have some old carbies there you can get the part off

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 26 Sep 2006, 8:28 am

#538090

Thanks, yeah I know of Ben and Perry at Georgetown. Thought I might be able to add a few dollars to an AVD members pocket.

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 26 Sep 2006, 2:00 pm

#538182

bump

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 · 26 Sep 2006, 2:31 pm

#538190

http://www2.cip1.com/ProductDetails.asp?ProductCode=C24%2D113%2D129%2D031%2DK

there are not too many spares as they all strip/seize that screw

This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 26 Sep 2006, 2:46 pm

#538195

a few people have said that. DUB74L mentioned something regarding a repair kit. ???

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 · 26 Sep 2006, 2:59 pm

#538199

very tricky repair as the thread is really fine and the placement is tricky. I dont imagine a jig to do it would be too hard and you would need a pretty high end drill/mill and it would cost more than the new one for tooling and labour.

New one has no wear and is apparently better quality than those mexi or brasil ones.

I would go the new one.

Actually I would go a set of Kadrons but my little devil is talking loud at the moment!

This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied

Proud_Dad Seriously Crusin Dubber

151 posts · joined Jul 2005 · 26 Sep 2006, 4:42 pm

#538234

Might be able to help you out mate,

Pulled my carby with the intent of replacing it with something different. Will u2u after work if you are still looking

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 26 Sep 2006, 5:12 pm

#538250

proud_dad, have sent u2u

CHADMYSTER Seriously Crusin Dubber

171 posts · joined May 2004 · 26 Sep 2006, 5:14 pm

#538253

koolkarmakombi wrote:very tricky repair as the thread is really fine and the placement is tricky. I dont imagine a jig to do it would be too hard and you would need a pretty high end drill/mill and it would cost more than the new one for tooling and labour.

New one has no wear and is apparently better quality than those mexi or brasil ones.

I would go the new one.

Actually I would go a set of Kadrons but my little devil is talking loud at the moment!

don't know about kadrons on my teenage daughters car. maybe for myself when i get my own!!

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 26 Sep 2006, 7:30 pm

#538295

i dunno if the old repair kits are still availble any more
the old screw and thread was drilled out and the new one was just glued in in its place

i sent allan this pic
its a bodgy method to fix a snapped off mixture screw head on one of my old engines
someone ground away the carb body around the screw then soldered a piece of flat steel on to the screw LOL
funny thing is it worked fine and still does

-Joel

1 attachment · Log in to view