Shift plate troubles - move this way

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 · 2 Oct 2006, 6:10 pm

#540181

I down loaded the CSP product page for the shifter i bought and it has this bit of helpful info

1st & 2nd wont engage - move shifter base to right

1st & 3rd wont engage - move shifter base to the front

2nd & 4th wont engage - move shifter base to the rear

reverse gear can be engaged with out pushing/pulling the lock out - move shifter plate to the left

Wish i had seen this before

Futue te ipsum!!!

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 2 Oct 2006, 8:21 pm

#540228

i went thro all that crap when i put my quick shift kit in

but when u think about the way it works its not hard to work all that out as its just pivoting on the ball so its the opposite direct to the gear position
but yes very helpful anywayz

-Joel

electricmonk Officially Full-On Dubber

287 posts · joined Aug 2005 · 7 Oct 2006, 7:45 pm

#542075

LOL I went through hell with my super trying to stop it going into reverse after fitting the bugpack one. No luck, then I tried it in my Type3. Still no blasted luck, at least it wasn't expensive. Perhaps the plastic ones are a little different

And they shall beat their swords into plowshares, for if you hit a man with a ploughshare, he'll know he's been hit